Subaru Decals

You bought the Subaru for the rally heritage, the wagon practicality, or the snow-ready AWD, and now you want the sheet metal to say so. This collection covers vinyl decals for WRX and STI hoods and fenders, Forester and Outback rear windows, BRZ side panels, and Baja tailgates. Everything is cut from automotive-grade vinyl, sized in inches for specific body locations, and shipped flat from the US. Whether you are restoring worn fender badges, adding rally stripes, or covering a pinstripe you regret, these decals are cut to order for real panel dimensions, not generic one-size-fits-all shapes.

Fit and Sizing for Subaru Decals

This collection includes Subaru wordmark decals, WRX and STI lettering, star cluster emblems, rally-inspired stripes, hood scoop graphics, and rear hatch decals for Outback, Forester, Crosstrek, Impreza, Legacy, BRZ, Ascent, and Baja. Buyers range from daily commuters covering a badge delete, to autocross and rallycross drivers marking class numbers, to owners replacing dealer-installed trim that peeled after a few winters. If your Subaru lives outside through New England road salt or Arizona sun, material choice matters more than artwork, and the sections below cover that directly.

Choosing Vinyl for Subaru Decals

Calendered vinyl is the workhorse for flat surfaces: rear windows, tailgates, rocker panels, and toolboxes. It runs 6 to 7 mil thick, holds gloss or matte finish, and typically serves well for 5 to 6 years outdoors. Cast vinyl is thinner, more conformable, and the right call for curved surfaces like fender flares, bumpers, hood scoops, and mirror caps. Cast repositions during install without fighting you and resists shrinking on complex curves.

• Gloss matches factory paint clear coat.
• Matte works on flat black trim and plastidipped panels.
• Static cling applies without adhesive and peels off clean.
• Clear is a subtle finish for layered looks and interior trim.

An air-release liner, standard on cast options, lets trapped air escape through micro channels instead of bubbling. A gloss or matte over-laminate adds sun protection for hood and roof placements that take direct sun all day.

Getting the Size Right for Subaru Decals

Measure the panel before ordering, then compare against these common placements:

• Rear window lettering on an Outback or Forester: 24 to 36 inches wide keeps the text readable without crossing defroster lines.
• Rocker panel stripes on a WRX: 60 to 80 inches long, 4 to 6 inches tall.
• Hood scoop trim: typically 8 to 12 inches wide for 02-07 and 15+ WRX scoops.
• Fender badge replacements: 3 to 4 inches, matching OEM emblem footprint.
• Windshield banners: 40 to 48 inches wide, positioned above the mirror mount line.

For curved rear quarters on a Crosstrek, add about 10 percent extra length so the decal can follow the wheel arch without stretching thin. When in doubt between two sizes, order the larger one and trim the backing to fit during dry fit.

How to Install and Maintain Subaru Decals

Steps:

• Wash the panel with dish soap and water, then wipe with isopropyl alcohol to remove wax and silicone.
• Dry fit with masking tape hinges at the top edge to confirm placement.
• Work above 60 degrees Fahrenheit or use a heat gun to warm the panel and vinyl.
• Peel the backing, spray the panel with slip solution for large pieces, and squeegee from center outward.
• On curves, heat the vinyl lightly and stretch over the contour, then squeegee again.
• Pop any trapped bubbles with a pin, not a blade.
• Wait 24 to 48 hours before washing.

Afterward, hand wash with mild soap and a microfiber mitt. Skip pressure washers at close range on decal edges, and skip automatic brush washes entirely on matte finishes. Re-wax around the decal, not over it.

Buying Guide for Subaru Decals

• Flat panel, budget-conscious: calendered vinyl, gloss or matte.
• Curved panel or bumper: cast vinyl with air-release liner.
• Hood, roof, full sun exposure: ask us about over-laminates for outdoor use.
• Rear window display: static cling on rear quarters or hatch.
• Temporary or lease car: smaller die-cut pieces on glass, easy to remove with heat.
• Matching OEM look: gloss black or gloss white to match existing trim.

If two options fit, pick the material rated for your climate, not the cheaper one. A decal that fails in year two costs more than the upgrade.

Related collections

• Car & Truck Decals
• American Flag Decals
• Boat & Marine Decals

Frequently asked questions

Will these decals damage my Subaru's paint when removed?

On factory paint in good condition, heat the decal with a hair dryer or heat gun and peel slowly at a shallow angle. Residue comes off with isopropyl alcohol. Freshly repainted panels should cure for 30 days before applying any vinyl, and removal on older, sun-baked clear coat should be done gently to avoid lifting loose edges.

Can I put a decal over rear defroster lines?

Yes, on glass. Apply as normal and squeegee along the defroster lines rather than across them. When removing later, use heat and pull slowly so the lines are not stressed. Avoid scraping with metal blades on any glass with defroster or antenna elements.

What size decal do I need for my WRX hood scoop?

Measure the scoop opening width in inches first, since it varies by generation. Most WRX hood scoop trims run 8 to 12 inches wide. Compare your measurement to the listed decal size and allow a small margin so the graphic does not overlap the scoop edges.

Do you offer the Subaru star emblem as a replacement decal?

This collection includes star cluster graphics and wordmark decals in several sizes. These are aftermarket vinyl decals, not OEM badges. If you are replacing a factory emblem, check the footprint measurement of your original badge against the decal dimensions before ordering.

How long should I wait after application before washing my car?

Wait 24 to 48 hours for the adhesive to fully bond, especially in cooler weather. After that, hand washing with mild soap is fine. Avoid high-pressure spray directly at decal edges and avoid automatic brush washes, which can catch and lift corners on thinner cast films.

Can I order a custom size or color for my specific Subaru model?

Yes, custom sizes and colors are available through our custom sticker options. Send your panel measurements in inches and the year and model of your Subaru. Note that custom-cut orders are made to your specs, so double-check measurements before submitting them.