By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A pair of Japanese street-style hood decals cut from Cast Vinyl, sized and shaped for Subaru WRX owners who want a clean motorsport-inspired look. Not affiliated with or endorsed by the manufacturer.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal pair brings the layered, offset lettering look popular on Japanese street builds straight to your hood. Each set includes two matching decals designed to sit symmetrically on either side of the hood, giving your WRX a race-inspired appearance without permanent paint work. The design language draws from track and tuner culture: bold shapes, clean lines, and a layout that reads well from a distance. Whether your car is stock, lowered, or fully built, these decals add visual interest that complements the aggressive front end of the WRX. They are cut to order in your choice of four sizes, so you can go subtle near the hood vents or run a larger statement piece. Not affiliated with or endorsed by the manufacturer.
We cut these decals from Cast Vinyl, the conformable material used for vehicle applications because it curves cleanly over body panels without lifting at the edges. The matte finish option blends into factory paint for a painted-on look, while gloss adds depth and shine. Both finishes are rated for outdoor exposure and resist fading from sunlight and washing. Application is a standard wet or dry install with transfer tape: position, squeegee, and peel. The adhesive holds firmly once set but the decals can be removed with heat when you are ready for a change. Because they are decals rather than paint, you can update your style whenever the mood strikes without touching the factory finish underneath.
This set is offered in four decal sizes: 4, 8, 12, or 18 inches, measured along the longest edge of each decal. The 4-inch pair works well as a small accent near the hood scoop or fenders. The 8-inch size is the most popular choice for a balanced hood placement that is visible but not overwhelming. The 12-inch decals make a clear statement and suit wider hoods or builds with other graphics already in place. The 18-inch pair is for owners who want maximum presence, running large graphics down the center or sides of the hood. Measure your hood before ordering to confirm which size fits your available panel space and desired look.
Start with a clean, dry hood free of wax, dust, and polish residue, ideally installed in temperatures above 60 degrees Fahrenheit. Lay each decal in position with light masking tape to check symmetry on both sides before committing. Peel the backing, mist the surface if you prefer a wet install for repositioning, and squeegee from the center outward to push out air and moisture. Work slowly across the transfer tape, then pull it back at a low angle. Avoid high-pressure washers directly on the edges for the first day while the adhesive fully sets. With careful placement, the pair lines up evenly and reads as a single designed Graphic across the hood.
No. The adhesive is designed for automotive paint and removes cleanly with applied heat. Avoid installing on fresh paint that has cured less than 30 days.
The 8-inch pair is the most common choice for balanced visibility. If you want a subtle accent, choose 4 inches; for a bold Graphic, go with 12 or 18 inches. Measure your hood space before ordering.
Lifespan depends on climate, washing habits, and sun exposure. Cast Vinyl is rated for outdoor automotive use, but we cannot guarantee a specific service duration for every condition.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
