Car Mirror Decals

The side mirrors on your truck are one of the first things other drivers see, and one of the hardest spots to dress with a standard sticker. Mirror decals are cut small and shaped to fit the flat back panel of a mirror housing without wrapping around edges or covering the glass. This collection covers mirror-sized vinyl for pickups, Jeeps, SUVs, and daily drivers, from American flag and hunting graphics to simple lettering and clear overlays. Because the application area is small and mostly flat, you can use calendered or cast vinyl here and get years of service, which keeps these decals among the most affordable ways to add personality to a vehicle.

Sizing, Fit and Placement for Mirror Decals

Every decal in this collection is sized to fit a typical side mirror housing, which on most US trucks and SUVs gives you a flat or gently curved panel roughly 4 to 7 inches wide. You will find flags, hunting and fishing graphics, brand logos, monogram lettering, and clear protective overlays.

• Truck owners adding matching graphics to a mirror that already carries a tailgate or window decal
• Jeep and Bronco drivers dressing up factory mirrors that sit exposed on tube doors
• Fleet and work truck operators placing small company marks or DOT-style identifiers on both mirrors
• Anyone who wants a low-commitment accent, since a mirror decal removes cleanly with heat and leaves no drilling or adhesive residue on paint

Vinyl and Finish Options

Most mirror decals here are cut from cast vinyl, a 6 mil calendered vinyl with a permanent solvent adhesive that performs well on flat and simple-curve surfaces like a mirror back. For mirrors with tighter curvature, such as tow mirrors with rounded housings, cast vinyl or other cast vinyl conforms without lifting at the edges. cast vinyl wrap films appear on some full-color printed options.

• Gloss is the default finish and matches most factory mirror caps
• Matte works well on textured or blacked-out mirror housings
• Matte vinyl gives a low-sheen, painted-on look
• Gloss is available on select decorative designs
• Printed graphics receive a gloss or matte laminate that shields against sun exposure, which slows fading on a surface that sits in direct sun all day
• Die-cut solid color decals skip laminate because the vinyl film itself is the printed material

Fit and Sizing for Mirror Decals

Measure the flat back of your mirror housing before ordering. Common decal widths in this collection run from 3 inches for compact car mirrors up to 8 inches for full-size truck tow mirrors. Height typically runs 1.5 to 4 inches.

• Standard half-ton mirror: a 5 x 3 inch decal fits with roughly an inch of margin on each side
• Compact crossover mirror: stay at 3 to 4 inches wide to avoid wrapping the housing edge
• Tow mirrors: the flat upper panel accepts up to 7 x 4 inches; the lower convex section usually needs a smaller piece
• Leave at least 0.5 inch of clearance from the housing seam so the edge of the decal does not sit on a gap where it can lift

Center the decal on the panel, not the mirror as a whole, since glass and housing edges are rarely symmetrical.

Installing and Caring for Mirror Decals

Plan the install when the mirror surface is between 60 and 90 degrees Fahrenheit and out of direct sun.

• Step 1: Wash the mirror housing with dish soap and water, then wipe with isopropyl alcohol to remove wax and road film.
• Step 2: Dry fully and mark your center point with small pieces of masking tape.
• Step 3: Peel the backing, spray the surface with a slip solution if the decal is large, and position it against your tape marks.
• Step 4: Squeegee from the center outward, working air to the edges. Cast vinyl with an air-release liner lets trapped air escape through micro channels.
• Step 5: Remove the transfer tape slowly at a 180 degree angle, pulling back on itself.
• Step 6: Wait 24 to 48 hours before pressure washing, and keep automatic car wash brushes off the mirrors for the first week.

For care, wash by hand with mild soap and re-warm the decal with a hair dryer if an edge ever lifts, then press it back down with a soft cloth.

How to Pick the Right Mirror Decal

Work through these in order:

• Measure first. Width of the flat panel minus one inch is your maximum decal width.
• Check curvature. Flat or simple curve, use calendered vinyl. Tighter curve, choose a cast vinyl option.
• Match the finish to the housing: gloss on painted caps, matte on textured black plastic.
• Consider sun exposure. A truck parked outside daily will see more sun, so ask us about our stocked matte, gloss, static cling and clear printed vinyl options for outdoor use.
• Order a pair if you want symmetry, and confirm the listing includes both left and right orientations when the design is directional, like a flag or arrow.

Related collections

• Car & Truck Decals
• American Flag Decals
• Boat & Marine Decals

Frequently asked questions

Will a mirror decal damage the paint or plastic on my mirror housing?

No, when applied to a clean surface and removed correctly. Warm the decal with a hair dryer or heat gun on low, then peel slowly at a shallow angle. Permanent adhesive releases cleanly from factory paint and most mirror plastics. Avoid scraping with metal tools, and clean any remaining adhesive residue with isopropyl alcohol.

How do I know what size decal fits my mirrors?

Measure the flat back panel of the mirror housing, not the glass, and subtract about one inch from the width. That gives you room for centering and keeps the decal off the housing seams. If your measurement falls between listed sizes, choose the smaller one so the edges do not wrap around the curve.

Can these go on heated or power-folding mirrors?

Yes. The decal sits on the outside of the housing and does not interfere with the heating element behind the glass or the folding motor. Just avoid covering any sensor or camera window on the housing, and check that the decal does not block the puddle lamp on tow mirrors.

How long will a mirror decal last on a vehicle parked outside?

Outdoor performance depends on material and sun exposure. Solid color calendered vinyl is a common choice for outdoor use, and cast vinyl is another stocked option. Printed graphics are available in matte, gloss, static cling and clear finishes. Trucks parked in harsh sun or run through brush-heavy terrain may show wear at the edges sooner.

Do I need to order two decals for both mirrors?

Check the individual listing. Some are sold as a pair with left and right versions, others are single decals. For directional designs such as flags or arrows, confirm the seller offers a mirrored orientation for the passenger side, or order two and flip one design if the listing notes that it is reversible.

Can I put a mirror decal somewhere else on my vehicle?

Yes, as long as the surface is smooth, clean, and roughly the same size. Buyers use smaller mirror decals on fuel doors, toolboxes, tailgates, and laptop cases. Avoid applying over textured bed liners or heavily contoured panels unless the decal is cast vinyl, since calendered film will not conform to deep texture.