Baby On Board Sticker, UV Laminated, Set of 3

Description

This three-piece baby on board sticker laminated set is made for rear windows that sit in strong sun all day. The gloss vinyl laminate helps guard against fading, and the removable adhesive lifts off without residue. This design is part of our all baby on board designs range.

What You Get and Where It Goes

This set includes three matching signs cut from gloss vinyl and finished with a UV-resistant laminate, so the yellow stays bright even when your car is parked in direct sun day after day. Each sticker is a single-piece decal, not a static sign, so it stays put at highway speeds and through car washes with hand washing. The classic placement is the lower corner of the rear window, where following drivers can read it at a glance. You can also apply one to a side window or a rear quarter panel. Because you receive three identical decals, you can outfit two family vehicles and keep a spare, or replace one years down the road if you ever change cars or window tint.

Choosing Between 4, 8, and 12 Inch

The 4 inch size works well for smaller rear windows, side glass, or a subtle placement that does not block your view. The 8 inch option is the most common choice for sedans, hatchbacks, and crossovers, large enough to read from a reasonable following distance without dominating the glass. The 12 inch size suits trucks, vans, and SUVs with tall rear windows, or drivers who want maximum visibility for the message. All three sizes share the same laminated gloss vinyl and the same artwork, scaled proportionally. Pick the size that matches your window height, and remember that a slightly smaller decal is easier to center and align during installation than an oversized one.

Applying Your Decal

Start with a clean, dry window above roughly 60 degrees Fahrenheit; if it is colder, work in a garage or wait for a warmer afternoon. Spray or wipe the glass with soapy water, then peel the backing from the decal and position it on the wet surface. The removable adhesive lets you slide and reposition the sticker until it sits level and centered. Once placed, squeegee or press outward from the center with a soft card to push water and air to the edges, then blot the edges dry. Leave the vehicle parked for a few hours before driving so the adhesive sets. Full instructions ship with the set.

Everyday Care and Cleaning

The gloss laminate is the working layer here: it takes the scrubbing, sun, and grime so the printed vinyl underneath does not have to. Wash around the decal with mild soap and a soft cloth or sponge, and avoid abrasive pads, plastic scrapers, or solvent-based glass cleaners sitting directly on the surface. Automatic brush car washes can be hard on any window decal, so touchless washes or hand washing are the safer routine. Ice scrapers should never contact the sticker; clear frost from that area of the glass with the defroster instead. With reasonable care, the UV-resistant laminate helps the colors resist sun fade through long summers of school runs and road trips.

Who This Set Suits

This set is built for new parents and caregivers in sunny climates who want a baby on board sticker laminated for lasting brightness rather than a thin unlaminated sign that fades after one season. It fits daily drivers, carpool vehicles, and grandparents' cars that only carry a car seat on weekends. The three-piece count means one purchase covers a two-car household, which is handy when both parents share drop-off duty. It also works for families who trade vehicles often, since the removable adhesive peels off cleanly when you sell a car or move the decal to a different window. If you want a clear, polite heads-up for tailgaters, this set delivers it in a durable format.

What you get

• Set of 3 identical decals for multiple vehicles or spares
• Laminated gloss vinyl with UV-resistant laminate
• Available in 4 inch, 8 inch, and 12 inch sizes
• Removable adhesive lifts off without residue
• Repositions on wet glass during installation
• Single-piece decal stays secure at highway speeds

Frequently asked questions

Will the sticker fade in the sun?

The UV-resistant laminate is specifically added to protect against sun fade, so the decal holds up far better in strong sun than an unlaminated sign. It is a smart pick for cars parked outdoors in southern or southwestern states. Like any printed product, gradual wear is possible over years of exposure, but the laminate is there to slow that process considerably.

Can I remove it later without damaging the window?

Yes. The decal uses a removable adhesive, so it peels off cleanly and lifts off without residue when you are ready to take it down. Warm the glass slightly with the rear defroster or a hair dryer on low if it has been on the window a long time, then peel slowly from one corner. Any leftover bits come off with mild soapy water.

Which size should I order?

For sedans and crossovers, the 8 inch size is the most popular fit for a rear window. Choose 4 inch for side glass, small windows, or a subtle look, and 12 inch for trucks, vans, and SUVs with tall rear glass. All three use the same laminated gloss vinyl and artwork, so the choice is purely about visibility and window proportions.

Can it go through a car wash?

The decal is a single piece with a firm adhesive, so it stays attached through normal driving and gentle hand washing. Touchless car washes are the safest option for the laminate and edges. Brush-style automatic washes can be rough on any window decal, so if you use one regularly, place the sticker away from the wiper path and inspect the edges afterward.