Dirt Bike & MX Graphics Kits

Riders, pit bike builders and weekend motocross racers shop this collection when they want a fresh look for plastic without paying for a full factory-style wrap. Every dirt bike graphics kit here is made to order in the USA from stocked materials like matte vinyl, gloss vinyl, clear vinyl and static cling, and ships free. Whether you are dressing up a 110cc pit bike or building a sponsor layout for race day, these decal sets cover the surfaces that take the most attention on the track.

What This Collection Includes

The Dirt Bike & MX Graphics Kits collection is built around the individual panels of a bike, so you can buy exactly what you need instead of a one-size bundle. The Pit Bike Graphics Kit 110cc | MX Graphics Kit Decals and the Custom MX Graphics Kit | Full Body ATV Decal Set are the broadest options, covering multiple surfaces in one coordinated design. If you only need to refresh the front of the bike, the Mini Bike Number Plate Decal Set | MX Graphics Kit and the MX Number Plate Background Decals - Pair | Dirt Bike dress the plates where your rider ID lives, while the Rider ID Number Graphics Kit | Custom MX Graphics Kit lets you feature your own number as the centerpiece.

From there, the collection gets more surgical. The Fork Guard Decal Set | MX Graphics Kit for Dirt Bikes and the Rear Fender Decal Set | Dirt Bike MX Graphics Kit target two of the most scuffed and photographed areas on the bike. The Tank Grip Decals for Dirt Bikes & ATVs | MX Graphics Kit adds a textured visual accent to the tank area, and the Motocross Sponsor Sticker Set | MX Graphics Kit Decals gives you a block of logos to lay out however your build demands. For head protection, the MX Graphics Kit for Dirt Bike Helmets | Decal Set pairs naturally with our wider Helmet Stickers range, and if you want to extend the theme to your tow vehicle, browse our Decals Stickers department for matching artwork.

How to Pick the Right Size for the Surface

Every kit in this collection is quoted in inches, with sizes running from 12 to 48 inches on the wider sets, and the key to a clean install is measuring the plastic before you order. Start by cleaning the shroud, fender, fork guard or number plate and laying a soft tape measure across the flat area you want to cover, not the total panel edge to edge. Curved sections of a fender eat up material fast, so if your flat zone measures close to the top of a size range, choose the next size up and trim the excess during installation rather than coming up short.

For number plates, measure the plate itself and compare it to the background decal dimensions, leaving a margin at the mounting holes so the sticker does not interfere with hardware. Pit bike and mini bike plastics are smaller than full-size motocross plastic, which is why the 110cc kit exists as its own product. When in doubt, note the year and model of your plastic in your order notes along with your measurements, and our team can flag anything that looks off before printing. Remember that all of these are made to order, so a little extra time spent measuring saves a reprint.

How to Fit a Large Decal

Surface prep matters more than anything else when fitting a large shroud or fender decal. Wash the plastic with warm water and mild soap, then wipe it down with isopropyl alcohol to remove any residue from mold release agents, chain lube or previous stickers. Let the panel dry completely, and work indoors or in the shade so the material is not fighting heat while you position it.

Peel a corner of the backing paper and tack the decal lightly at one edge, holding the rest up so it does not touch down early. Use a felt-edge squeegee to press the sticker down in overlapping strokes, working from the center outward toward the edges. On a big piece like a shroud graphic, a drop of soapy water on the surface lets you slide the decal into final position before you squeegee the water out. If you trap an air bubble, do not pull the whole decal up. Instead, lift the nearest edge slightly and press the bubble toward it, or prick the bubble with a pin and smooth the air out with the squeegee. Take your time on compound curves, warming the material gently with a hair dryer on low so it conforms, and always trim excess with a sharp blade rather than tearing.

Care and Removal

After fitting, let the adhesive settle for a day before washing the bike. When you do clean it, use mild soap and a soft cloth or sponge, and avoid high-pressure spray nozzles pointed directly at the edges of the graphics, since direct pressure can lift a corner. Park out of harsh conditions when you can, and inspect the edges after muddy rides, pressing down anything that has started to lift.

When it is time for a new look, removal is straightforward. Warm the decal with a hair dryer on low to soften the adhesive, then peel slowly at a shallow angle rather than straight up. Any adhesive left behind comes off with isopropyl alcohol and a microfiber cloth. Because these kits are printed on matte, gloss, clear or static cling vinyl, the removal method is the same across the collection, and static cling pieces simply peel off with no residue at all, which makes them handy for temporary race-day number backgrounds.

Are these graphics kits printed for my specific bike model?

The kits are cut and sized in inches rather than model-specific, so they fit a wide range of dirt bikes and ATVs when you measure your shrouds, fenders, fork guards or number plates first. Note your bike details in your order and our team will double-check the sizing before printing.

What materials are the dirt bike graphics kits printed on?

Every kit is printed on stocked materials only: matte vinyl, gloss vinyl, clear vinyl or static cling. Matte gives a low-sheen race look, gloss pops in photos, clear lets your plastic color show through, and static cling works for temporary number backgrounds.

Can I get my own rider number and sponsor logos in a kit?

Yes. The Rider ID Number Graphics Kit and the Motocross Sponsor Sticker Set are built for custom layouts, so you can send your number, name and sponsor artwork and we will print your layout to order in the USA with free shipping.