Pit Bike Graphics Kit 110cc | MX Graphics Kit Decals

Description

Full-coverage decal set for 110cc pit bikes and mini dirt bikes, printed on durable vinyl in your choice of matte, gloss, clear, or static cling. Available in 12-inch to 48-inch widths to fit small-frame bikes.

Full Pit Bike Decal Coverage in One Set

This graphics kit covers the panels riders replace most often on a 110cc pit bike: shrouds, airbox sides, front and rear fenders, fork guards, swingarm, and body trim pieces. Each decal is pre-shaped for small-frame mini bike panels and trimmed to wrap around curves without bunching at the edges. Instead of piecing together individual stickers, you get a coordinated set designed to work together as one look across the whole bike. Choose from four widths, 12, 24, 36, or 48 inches, so you can match the set to your bike's panel sizes and trim any overlap for a clean fit on aftermarket plastics as well as stock-style bodywork.

Choose Your MX Graphics Kit Finish

Every set in this collection is printed in one of four finishes: matte for a low-sheen race look, gloss for a bright factory-style shine, clear for layering over painted or colored plastics, or static cling for temporary display use that peels off without adhesive residue. The matte and gloss options use cast vinyl that conforms to compound curves on shrouds and fenders, while the clear option lets your base plastic color show through the printed design. Static cling is best for show bikes, photos, or short-term use where you want to remove the graphics later. Pick the finish that matches how and where you ride.

Built for Track Days, Trails, and Garage Builds

Pit bikes get used hard, tossed in trucks, leaned against fences, and ridden through mud and brush. These decals are printed with printed inks on vinyl formulated for outdoor exposure, so colors hold up through sun, dirt, and pressure washing when applied and cared for properly. The material flexes with plastic panels instead of cracking at stress points, and edges are cut clean to resist peeling from brush contact. Whether you are refreshing a worn pit bike for the backyard track, finishing a mini bike build, or dressing up a paddock bike, this set gives you a finished look without the cost of custom paint.

How to Apply Your Pit Bike Decal Set

Start with clean, dry plastics free of wax, mud, and old adhesive. Warm the decals slightly with a hair dryer or heat gun on low to help the vinyl conform around shrouds and fender edges, then squeegee from the center outward to push out air. Work panel by panel, aligning each piece before pressing it fully down. Trim any excess at wrap points with a sharp blade. Full application takes most riders under an hour with basic tools. Static cling pieces simply press onto smooth, clean plastic and can be repositioned or removed by hand, making them a low-commitment option for display bikes.

What you get

• Full decal set for 110cc pit bikes and mini dirt bikes
• Four width options: 12, 24, 36, and 48 inches
• Available in matte, gloss, clear, and static cling finishes
• Cast vinyl conforms to curved shrouds, fenders, and fork guards
• printed inks printed for outdoor riding conditions
• Pre-shaped pieces for shrouds, fenders, airbox, swingarm, and trim
• Made to order in the USA by LEO Sticker

Specifications

Frequently asked questions

Will this kit fit my 110cc pit bike?

The set is designed for small-frame 110cc pit bikes and mini dirt bikes, but plastic shapes vary between models and aftermarket brands. Choose the width that matches your bike, and trim any excess material at edges and wrap points for a clean fit.

Which finish should I choose for a bike that gets ridden regularly?

Matte or gloss cast vinyl is the best choice for bikes that see mud, sun, and washing, since the adhesive-backed vinyl bonds to the plastic and conforms to curves. Clear works well over colored plastics, and static cling is intended for display or short-term use since it has no adhesive.

Can the decals be removed later?

Yes. Warm the decals with a hair dryer or heat gun on low and peel slowly from one edge. Any remaining adhesive can be cleaned off with isopropyl alcohol. Static cling pieces remove by hand with no residue.