Mini Bike Number Plate Decal Set | MX Graphics Kit

Description

A mini bike graphics kit built as a number plate decal set, printed on durable cast vinyl for pit bikes and small-bore dirt bikes. Choose your width from 12 to 48 inches to match your plate size.

Number Plate Decals Sized for Mini Bikes and Pit Bikes

This decal set is made for riders who want clean, custom number plates without ordering a full-body mx graphics kit. Each set covers the front and side number plates on mini bikes and pit bikes, giving you a coordinated look in one purchase. Because mini bike plates vary between builds and aftermarket frames, we offer widths from 12 inches up to 48 inches, so you can pick the size that fits your setup instead of trimming down a one-size decal. The printed background, numbers, and trim colors are laid out to read clearly from a distance, which helps at track days, pit races, and practice sessions where plate numbers need to be identifiable. Choose your width and colors at checkout, and the set ships as a matched set ready to apply.

Matte or Gloss Cast Vinyl Built for Dirt

Every decal in this set is printed on cast vinyl, a thin, conformable material that follows the slight curves and edges found on number plates without lifting at the corners. Cast vinyl also resists the everyday abuse a dirt bike sees: pressure washing, mud packing, boot rubs, and roost from the rider ahead of you. You can choose a matte finish for a low-sheen look that hides scuffs and glare under track lighting, or a gloss finish when you want the numbers to pop with a wet-look shine. Both finishes use the same printing process and the same adhesive, so the choice is purely about how you want the plates to read in photos and on the starting line. Apply to a clean, dry plate for the best hold.

How to Apply Your Mini Bike Number Plate Set

Application works best on plates that are clean, wax-free, and at room temperature. Start by removing the old decals with a heat source or adhesive remover, then wipe the plate down with isopropyl alcohol and let it dry fully. Peel the decal from its backing, position it on the plate, and press from the center outward to push air toward the edges. A squeegee or the edge of a card helps smooth the decal down, and light heat helps it conform around curves and rivet areas. Take your time aligning the number before pressing it down, since repositioning is easiest before full adhesion sets in. Once applied, let the set sit before riding or washing so the adhesive bonds to the plate.

A Complete Set for Riders Who Race or Ride for Fun

Whether you run a pit bike series, chase your kids around a backyard track, or keep a mini bike in the garage for fun, this set gives you plates that look intentional rather than pieced together. It also works as a quick refresh when old decals have faded, peeled, or taken one too many pressure washes. Because each set is printed to order in your chosen width and colorway, you can match an existing look or build a new one without replacing an entire mx graphics kit. If you ride multiple bikes, order a set for each and keep the spare plates consistent across the fleet. This is a practical upgrade for any small-bore build.

What you get

• Printed number plate decal set sized for mini bikes and pit bikes
• Available in widths from 12 to 48 inches to match your plate
• Choose matte or gloss cast vinyl at checkout
• Thin, conformable material follows plate curves and edges
• Sold as a matched front and side plate set
• Printed to order in your selected colorway
• Made in the USA

Specifications

Frequently asked questions

How do I choose the right width for my number plates?

Measure the widest point of each plate you plan to cover, then select the closest width option from 12 to 48 inches. If you are between sizes, sizing up gives you trim room along the edges.

Will these decals hold up to pressure washing?

The cast vinyl and adhesive are chosen for dirt bike use, including regular washing. Avoid aiming a high-pressure nozzle directly at the edges of the decal from close range, as that is the most common cause of lifting.

Can I get this set in custom colors or numbers?

Yes. Each set is printed to order, so you can select your colorway and number layout when ordering. If you need something outside the standard options, contact us before ordering and we will let you know what is possible.