By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A skull decal on the back window of a pickup or the side of a toolbox says something specific, and this collection is built for that spot. Every decal here is cut vinyl, not printed paper, so it holds up to highway speeds, car washes, and winter road salt.
Showing all 14 resultsSorted by popularity
A skull decal on the back window of a pickup or the side of a toolbox says something specific, and this collection is built for that spot. Every decal here is cut vinyl, not printed paper, so it holds up to highway speeds, car washes, and winter road salt. You will find traditional skulls, sugar skulls, flaming skulls, and skull-and-flag designs sized for tailgates, quarter windows, toolboxes, and fuel doors. Whether you want a small 4-inch mark next to your door handle or a 24-inch tailgate centerpiece, the graphics below are die-cut from US vinyl stock and shipped flat, ready to apply with nothing more than a squeegee and a few minutes.
This collection covers die-cut skull graphics for exterior vehicle surfaces. Styles range from simple outline skulls that read cleanly at a distance to detailed sugar skulls and flaming skulls with fine cut lines. Common placements include rear windows, tailgates, quarter panels, toolboxes, and fuel doors.
It suits truck owners building out a themed rig, car owners adding a single accent piece, and anyone pairing a skull graphic with other vehicle decals from our car and truck lines, such as American flag or camo designs. Most graphics are single-color cut vinyl, so they match your vehicle color rather than covering it with a printed background.
Flat panels like tailgates and toolboxes work well with calendered films such as cast vinyl, a 6-year outdoor gloss vinyl that is the workhorse of vehicle graphics. Curved surfaces such as fenders and bumper corners call for cast vinyl like cast vinyl or cast vinyl, which stretches and conforms without lifting at the edges.
Larger graphics and printed-color skulls ship with an air-release liner, so bubbles push out during application instead of getting trapped. A gloss or matte laminate layer adds a smooth surface over the print, which can help dark colors like black skulls look cleaner on a hot dashboard or hood. Matte finishes cut glare on rear windows; static cling film is available on select designs for temporary placement; clear film is offered on a small number of skull styles for a subtle look.
Size the decal to the surface before ordering. A 4 to 6 inch skull fits a fuel door, mirror cap, or the space beside a door handle. An 8 to 12 inch decal works on a quarter window, toolbox lid, or motorcycle tank. For tailgates and rear windows, 16 to 24 inches fills the space without crowding the brake light or defroster lines.
On a full-size pickup tailgate, a 20-inch skull centered between the handle recess and the bottom edge sits balanced. On sedan trunk lids, 12 to 14 inches is usually the ceiling before the graphic wraps onto curved edges. Measure the flat area only, and subtract about an inch of margin so edges do not land on body lines.
Step 1: Clean the surface with isopropyl alcohol and a lint-free cloth. Skip wax or ammonia cleaners, they leave residue that prevents adhesion.
Step 2: Position the decal with small strips of masking tape, then tape one full edge as a hinge.
Step 3: Peel the backing away, working from the hinged side, and squeegee from center outward. On air-release liner products, push trapped air toward the nearest edge.
Step 4: Peel the application tape slowly at a sharp angle back on itself. If a piece lifts, press it down and re-squeegee.
Care: Wait 48 hours before washing. Hand wash or use touchless car washes; brush car washes can catch edges. Park out of direct afternoon sun when possible to slow fading on non-laminated decals.
Touchless car washes are fine after the first 48 hours. Brush-style washes are the risk, since spinning brushes can catch and lift a decal edge, especially on corners. If you use a brush wash weekly, choose cast vinyl with laminate and keep edges away from body lines. Hand washing is always the safest option.
Yes. Cut vinyl applies over defroster lines without interfering with them. Press firmly along each line with the squeegee so the decal bonds in the small valleys between lines. When removing it later, use heat and pull slowly at a low angle to avoid leaving fragments in the grooves.
Calendered vinyl is rated for roughly 5 to 6 years of outdoor exposure, and cast films are rated longer. Real lifespan depends on sun exposure, washing habits, and climate. A laminate layer extends color life on dark graphics parked outdoors daily.
Measure the flat area between the handle recess, tailgate edges, and any camera or sensor trim, then subtract an inch of margin. On most full-size pickups that supports an 18 to 24 inch graphic. On midsize trucks, 14 to 18 inches usually fits better. When in doubt, go smaller rather than wrapping onto curves.
On original factory paint, warm the decal with a hair dryer or heat gun on low and pull slowly at a shallow angle. Residual adhesive comes off with isopropyl alcohol or a dedicated adhesive remover. Freshly repainted vehicles should wait at least 30 days after painting before applying any decal.
Yes. Bulk quantities are handled through our bulk and wholesale stickers line, and fully custom shapes and colors go through the custom stickers collection. For matching an existing vehicle decal, order a small swatch first to confirm the color and finish match before committing to a larger graphic.
Your shopping cart is empty
Notifications
