By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
Slap a bass decal on the truck window, mark your tackle box, or label the cooler that rides in the boat every weekend. This collection of fishing stickers covers the gear anglers actually carry: freshwater species like largemouth bass and walleye, saltwater fish like tarpon and redfish, plus lure lo…
Showing all 3 resultsSorted by popularity
Slap a bass decal on the truck window, mark your tackle box, or label the cooler that rides in the boat every weekend. This collection of fishing stickers covers the gear anglers actually carry: freshwater species like largemouth bass and walleye, saltwater fish like tarpon and redfish, plus lure logos, hook graphics and lake-name decals. Each design is cut from outdoor-rated vinyl so it holds up to sun, spray and road grime. Whether you fish tournaments, run a guide boat, or just want your kayak and garage fridge to match your hobby, these decals are sized for smooth surfaces and made to stay put through seasons of use.
Fishing stickers here fall into a few groups: single-fish silhouette decals for truck windows and boat hulls, small die-cut stickers for tackle boxes, coolers and laptops, and lettering decals for lake names or species labels. Sizes range from about 3 inches for gear marking up to 24 inches for boat and trailer placement. The collection suits weekend anglers, tournament fishermen, kayak and fly anglers, saltwater crews, and anyone shopping for a gift for a fishing buddy. It sits in our Sports & Fan Stickers category alongside hunting and team decals, so you can mix designs across your favorite outdoor sports.
Most decals in this collection are cut from calendered vinyl, a 6-year outdoor-rated film with a gloss finish that works well for truck windows, coolers and tackle boxes. Larger boat and hull decals may use cast vinyl, which conforms better to curved surfaces and resists shrinking in heat. Some premium options use cast vinyl with an air-release liner, which helps push bubbles out during installation on wide, flat areas. Finishes include gloss for a wet-look shine, matte for a low-glare look on dashboards and gunwales, plus static cling and clear options for tackle box stickers that stand out at the dock. Ask us which film a specific design uses before ordering.
Match decal size to the surface. A 3 to 4 inch sticker fits a tackle box lid, thermos or laptop. A 5 to 6 inch decal works on a cooler lid or kayak bow. For truck side windows and rear glass, 8 to 12 inches reads clearly from a car length away. Boat hulls and transoms take 12 to 24 inch decals. Before ordering, measure the flat area you have: on hulls, avoid strakes, rivets and through-hull fittings. On truck windows, check that the decal sits above the rear wiper path and does not block your view. For lockers and garage refrigerators, an 8 inch decal centered on the door is a common choice. Leave at least 1 inch of clearance around the edges for a clean look.
Step 1: Clean the surface with isopropyl alcohol and let it dry fully. Skip wax cleaners, which leave residue.
Step 2: Position the decal with masking tape along one edge as a hinge, and step back to check alignment.
Step 3: Peel the backing, hold the decal taut, and squeegee from the taped edge outward with a felt-edge applicator or credit card.
Step 4: Remove the transfer tape slowly at a 180 degree angle, pulling back over itself.
Step 5: For air-release films, press trapped bubbles toward the nearest edge.
Care: Wash by hand with mild soap. Avoid pressure washers at close range and gas station brush washes on large decals. Park in shade when possible to extend vinyl life.
Yes, the outdoor-rated vinyl films used here stand up to salt spray, sunlight and moisture. For transoms and hull areas near the waterline, cast vinyl is the better pick because it conforms to curves and resists edge lifting. Rinse decals with fresh water after saltwater trips and avoid scraping them with brushes when cleaning the hull.
An 8 to 12 inch decal is the usual range for rear glass. Measure the clear space between window seals and any defroster lines you want to avoid crossing. Keep the decal out of the wiper path on SUVs and hatchbacks. Anything under 6 inches tends to read as clutter on a full-size truck window.
Smooth plastic tackle box lids take decals well after a wipe with isopropyl alcohol. Heavily textured or dimpled plastic is a problem, because adhesive bonds only to the peaks and edges lift over time. For rough surfaces, choose a smaller sticker and press firmly with a squeegee, or place it on a smooth label recess if your box has one.
Warm the decal with a hair dryer or heat gun on low to soften the adhesive, then peel it back slowly at a shallow angle. Remove leftover adhesive with isopropyl alcohol or a dedicated adhesive remover and a microfiber cloth. On painted surfaces, test the remover in a hidden spot first and avoid sharp tools.
Yes. Our Bulk & Wholesale Stickers collection covers multi-pack and larger-quantity orders for clubs, tournaments, guides and bait shops. Contact us with the design, size and quantity you need and we can quote pricing and lead time before you order.
Stickers and decals ship from our US facility, typically within a few business days of ordering, with USPS and UPS options at checkout. Cut-to-order items may add a day or two of production time. You will receive tracking by email once your order ships. Larger boat decals ship rolled or flat to protect the film.
Your shopping cart is empty
Notifications