Flame Decals

A flame decal turns a plain door panel, fender or tailgate into something with motion, even parked in a driveway. This collection covers flame graphics in sizes and materials that work on real vehicles: small accent flames for mirrors and windows, mid-size sets for doors, and long strips that run the length of a rocker panel or truck bed. Most designs come as single-color cut vinyl you apply wet or dry, while some are printed and laminated for multi-color fades. Whether you are dressing up a work truck, a show car or a trailer, the guides below cover material choice, sizing and install steps so the flames sit flat and stay put.

What's in the Flame Decals Collection

This collection includes flame decals sized for specific vehicle zones: fender and mirror accents in the 4 to 8 inch range, door panel flames from 12 to 24 inches, rocker and bedside flame strips from 36 to 60 inches, and hood or tailgate wraps from 48 inches and up. You will find single-color cut vinyl flames, two-tone layered sets and printed flame graphics with gradient fills.

• Truck owners: bedside and tailgate flames that pair with bed decals and diesel-themed graphics.
• Car owners: fender and rocker flames for street cars and show builds.
• Trailer and tool chest owners: long flame strips for flat panels.
• Shops and resellers: multi-packs available, with bulk quantities through our wholesale stickers collection.

Flame Decals: Materials and Finishes

Flame decals come in two vinyl families, and the right one depends on where the flames go.

• Calendered vinyl: a 6 mil intermediate vinyl with a solvent adhesive, well suited to flat or gently curved panels like tailgates, toolboxes and trailers. Typically rated 5 to 6 years outdoors.
• Cast vinyl: thinner and more conformable, so it wraps around fender contours, mirror caps and body lines without lifting or wrinkling. This is the choice for curved surfaces.
• Air-release liner: available on cast options, it lets trapped air escape through micro channels during install, which matters on large flame strips.
• Laminate for Sun Protection: printed flame graphics get a gloss or matte overlaminate to slow sun fade, a smart add in southern states.

Finish options include matte, gloss, clear and static cling. Matte and gloss are usually calendered, so keep them on flatter areas.

Fit and Sizing for Flame Decals

Measure the panel before ordering, and leave margin at the edges. These guidelines work for most US trucks and sedans:

• Mirrors and pillar accents: 4 to 6 inch flames. Measure the flat area of the mirror cap first.
• Fender flares: 8 to 12 inch flames, positioned to follow the flare curve. Cast vinyl recommended.
• Door panels: 12 to 24 inch flames, with at least 1 inch of clearance from door handles and body lines.
• Rocker panels: 36 to 60 inch strips, running 2 to 3 inches above the lower body crease.
• Tailgates: 40 to 60 inch wide sets, centered with 2 inches of space on each side for a clean border.

For layered two-tone flames, order both colors at the same time so the shades come from the same production batch.

Installing and Caring for Flame Decals

Install steps:

• 1. Clean the panel with isopropyl alcohol and a lint-free towel. Skip wax or silicone cleaners, they cause adhesion failures.
• 2. Position the decal with masking tape along one edge as a hinge, then step back and check alignment from 10 feet away.
• 3. Peel the backing and apply from the hinge outward, using a felt-edge squeegee. On cast vinyl over curves, use light heat from a heat gun and stretch in small passes.
• 4. If the decal has an air-release liner, press firmly and watch for air channeling to the edges. For non-channel liner, lift and re-lay rather than forcing bubbles.
• 5. Remove the application tape at a 180 degree angle, pulling back on itself slowly.

Care: hand wash with mild soap, avoid pressure washing directly at the flame edges, and keep wax away from the vinyl edge line. Park in shade when possible to extend color life.

How to Choose a Flame Decal

Work through these questions in order:

• Flat or curved surface? Flat means calendered works fine. Curves mean cast vinyl.
• How much sun exposure? For heavy sun, consider a darker solid color, since printed vinyl can show fading over time in outdoor conditions.
• What look? Gloss reads like paint, matte reads understated, clear blends in.
• Temporary or long term? Removing calendered vinyl after years outdoors is harder; cast peels cleaner.
• Matching other graphics? Browse sibling collections like camo, American flag or diesel decals so finishes and colors stay consistent across the vehicle.

If the flames are part of a bigger build, a decal kit may be simpler than piecing together individual sets.

Related collections

• Car & Truck Decals
• American Flag Decals
• Boat & Marine Decals

Frequently asked questions

Will a flame decal stick to a curved fender?

It depends on the material. Calendered vinyl handles gentle curves but will lift or wrinkle over tight fender contours. Cast vinyl is thinner and stretches with heat, so it holds on compound curves. Check the material listed on each product before ordering for a curved panel.

How long do vinyl flame decals last outdoors?

Most quality cast vinyls are rated for 5 to 7 years of outdoor exposure, and intermediate calendered vinyls around 5 to 6 years. Printed flame graphics with a protective laminate hold color longer than unprinted ink. Actual life depends on sun exposure, washing habits and whether the vehicle is garaged.

Can I put flames over existing paint that has been waxed?

No, wax prevents good adhesion. Strip the wax first with an isopropyl alcohol wipe or a dedicated wax remover, then dry the panel completely. Freshly waxed paint is one of the most common reasons a decal edge lifts within weeks of install.

What size flame decal fits a full-size truck door?

A 12 to 24 inch flame set fits most full-size truck doors with room to spare. Keep at least 1 inch of clearance from handles, keyholes and body creases. For a flame running the full bedside, look for 48 to 60 inch strips and measure the flat area between the wheel arches first.

Do you offer flame decals in matte or gloss finishes?

Yes, select flame designs come in matte and gloss finishes. Both are typically produced on calendered vinyl, so install them on flatter panels rather than tight curves. Gloss flames are popular on work trucks and trailers because they read like paint.

How do I remove a flame decal without damaging paint?

Warm the vinyl with a heat gun or hair dryer on low, then peel slowly at a shallow angle. Cast vinyl usually comes off in one piece. Leftover adhesive removes with a citrus-based adhesive remover and a microfiber towel. Avoid scraping with metal tools on factory paint.