Tribal Flame Body Graphic Kit for Jeep Grand Cherokee

Description

A tribal flame body graphic kit cut from cast vinyl, sized to fit Jeep Grand Cherokee doors and quarter panels. For owners who want a custom flame layout without a full paint job.

Tribal Flame Graphics for Your Jeep Grand Cherokee

This tribal flame body graphic kit brings a layered flame layout to the sides of your Jeep Grand Cherokee. Each kit is cut from cast vinyl and sold as a matched set, so the sweeps, hooks and tapered tips line up the way the design intends when you place them along your doors and quarter panels. Choose a width from 12 to 48 inches to control how far the flames stretch across the body. Whether you run a subtle tongue of flame behind the front wheel or a full side-sweeping layout, the tribal styling reads clean from curb distance. Not affiliated with or endorsed by the manufacturer.

Choose Your Finish and Width

Every kit is printed in your choice of matte, gloss, clear or static cling finish. Matte gives the flames a painted-on look that sits flat against factory paint. Gloss adds depth and shine that catches light along the tapered edges. Clear lets the body color show through the flame pattern for a ghost-flame effect. Static cling is the pick if you want the look for a season, a show weekend or a lease vehicle, since it peels off without adhesive residue. Widths run from 12 inches up to 48 inches, so you can scale the design to a single accent or a full side treatment.

How the Kit Goes On

Application is a dry or wet lay-up with transfer tape, the same method used for most side graphics. Start with a clean, wax-free surface and a mild day, then work each panel from the leading edge back, using a squeegee to push air out as you go. The vinyl conforms to the gentle body lines of the Grand Cherokee doors and fenders, and the flame pieces are cut so you can trim around handles and body creases with a sharp blade. Full placement guidance ships with the kit, along with tips for aligning the left and right sides so the layout mirrors evenly.

Care, Removal and Reordering

Once applied, wash by hand or with a gentle touchless wash and skip high-pressure sprays pointed directly at the edges. Avoid waxes and polish directly on the graphic. When it is time to remove the kit, warm the vinyl with a hair dryer and peel it back slowly; cast vinyl typically comes away in one piece from a well-prepped surface. If you want to refresh the look later, reorder the same set or try a different finish. Every kit is cut to order, so you can message us before purchase with questions about width selection or placement on your specific trim.

What you get

• Tribal flame layout cut as a matched left and right set
• Available in 12" to 48" width options
• Choose matte, gloss, clear or static cling finish
• Cut from cast vinyl that conforms to body lines
• Sized for Jeep Grand Cherokee doors and quarter panels
• Ships with transfer tape and placement guidance
• Static cling version removes without adhesive residue

Specifications

Frequently asked questions

Does this kit fit my Jeep Grand Cherokee?

The flame pieces are sized and shaped for Grand Cherokee doors and quarter panels, with width options from 12 to 48 inches so you can scale the layout to your body style. Not affiliated with or endorsed by the manufacturer.

Which finish should I choose?

Matte looks painted-on, gloss adds shine, clear creates a ghost-flame effect over your body color, and static cling is removable without adhesive for temporary use.

Can I apply the graphics myself?

Yes. The kit ships with transfer tape and placement instructions, and the vinyl can be applied dry or wet with a squeegee. A clean, wax-free surface and mild weather give the best results.