Northwest Stripes Boat Decals | Custom Racing Stripes

Description

A pair of cast vinyl racing stripe decals cut to your chosen width, made for boat owners who want a clean stripe look without paint. Choose from 12 to 48 inch widths at checkout.

Northwest Stripes Decals Built for Boat Hulls

This Northwest Stripes set brings a classic twin-stripe layout to your hull in a fraction of the time and cost of painted graphics. Each order includes two matching stripe decals, so you can run them down both sides of your boat for a balanced look. We cut the stripes from cast vinyl in your choice of matte or gloss finish, and they arrive pre-spaced on application paper so alignment is straightforward. Pick the width that fits your boat, from 12 inches up to 48 inches, and apply them to gelcoat, painted surfaces, or smooth fiberglass. Whether you are dressing up a fishing boat, a pontoon, or a runabout, this set gives you a sharp, custom racing stripes look you can install in an afternoon.

Choose Your Width and Finish

Every boat is different, which is why we offer this stripe set in multiple widths. A 12 or 18 inch pair works well on smaller craft or as an accent stripe above the waterline, while 24 to 36 inch sets fill out the sides of mid-size boats. The 48 inch option suits larger hulls where you want the stripes to carry real presence from bow to stern. Both matte and gloss finishes are available, so you can match a flat modern look or mirror the shine of your gelcoat. If you prefer a subtler effect, our clear and static cling options let the hull color show through the stripe area. Measure the flat, unobstructed section of your hull before ordering to confirm which width fits best.

Applying Your Boat Decals

Installation is a wet-application process, which gives you room to slide the stripes into position before the adhesive sets. Start with a clean, wax-free hull; wash the area with dish soap and water, then wipe with isopropyl alcohol and let it dry fully. Mix a few drops of dish soap into a spray bottle of water and mist the surface. Peel the backing, position the stripe, and use a squeegee or plastic card to push water out from the center outward. Leave the application paper in place for about twenty minutes, then peel it back slowly at a low angle. Keep the boat out of the water for at least 24 hours so the adhesive bonds fully. Full instructions ship with every set.

Why Boat Owners Order From LEO Sticker

We cut every stripe set to order in our US shop rather than pulling pre-made stock off a shelf, so your chosen width and finish are what actually arrives at your door. Our cast vinyl conforms to the gentle curves of a hull without lifting at the edges, and the matte and gloss finishes are cut from the same material we use across our whole decal catalog. Each set ships with application paper, a squeegee, and illustrated instructions, and our team is available by email if you hit a snag during installation. If you are pairing these stripes with a boat name or port graphics, we can help you plan the layout so everything lines up before you order.

What you get

• Set of two matching stripe decals, one for each side of your boat
• Available in 12, 18, 24, 36, and 48 inch widths
• Cut from cast vinyl in your choice of matte or gloss finish
• Clear and static cling options for a subtler look
• Pre-spaced on application paper for easier alignment
• Wet-application install with included squeegee and instructions
• Cut to order in our US shop

Specifications

Frequently asked questions

How do I pick the right stripe width for my boat?

Measure the flat section of hull where you want the stripes, away from rivets, curves, and hardware. If the space is tight or the hull curves sharply, choose a smaller width. The 12 and 18 inch sets suit smaller boats, while 36 and 48 inch sets fill out larger hulls.

Will these stripes work on textured or nonskid surfaces?

These decals are designed for smooth surfaces such as gelcoat, painted fiberglass, and smooth aluminum. Textured nonskid areas will not give the adhesive enough contact to hold long term.

Can I remove the stripes later?

Yes. Warm the decal with a hair dryer or heat gun on a low setting and peel it back slowly at a shallow angle. Any remaining adhesive can be cleaned off with isopropyl alcohol. Static cling versions remove without heat or residue.