By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A pair of matte or gloss number plate background decals for motocross and dirt bikes, cut to your chosen width from 12 to 48 inches. Made for riders building a custom graphics kit look.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
Number plate backgrounds are the base layer of any motocross build. Instead of running bare plastic with stick-on numbers, a clean background decal gives your plates a uniform color field so race numbers, class letters, and sponsor logos sit on a smooth, consistent surface. This pair covers both side plates, so your bike reads the same on the left and right whether you are lining up at a local gate day or building a full mx graphics kit one piece at a time. Riders also use backgrounds to refresh faded or scuffed plates without buying new plastic, which keeps a season bike looking sharp between rounds.
Every bike is a little different, so these backgrounds are offered in a range of widths from 12 to 48 inches, letting you pick the size that fits your plate shape before trimming to final contour during install. Finish comes down to personal preference. Matte gives plates a flat, low-sheen race look that hides glare and fingerprints, while gloss delivers that fresh-from-the-shop shine that pops in photos. Both finishes are printed on quality cast vinyl that conforms to the slight curves of number plates without lifting at the edges. Pick the option that matches the rest of your build and order the pair in one go.
We print each pair to order in our US shop on cast vinyl using eco-solvent inks, so colors go down dense and consistent across both pieces of the set. The vinyl is laminated for abrasion resistance, which matters on plates that take roost, boot rub, and pressure washing week after week. Because these are printed backgrounds rather than pre-cut shapes for one specific model, they work as a universal fit solution: you size by width, then trim to your plate outline. This approach suits riders with aftermarket plastic, older bikes, or non-standard plate sizes that ready-made kits do not cover.
Installation works best on plates that are clean, dry, and free of old adhesive residue, so wipe the surface with isopropyl alcohol before you start. Peel the backing, position the decal starting from one edge, and smooth it across the plate working out air as you go, finishing with a squeegee or the edge of a card. Trim the excess along the plate outline with a sharp blade, keeping the angle low so you do not score the plastic underneath. Take your time around screw holes and corners. Once trimmed and pressed down firmly, the backgrounds are ready for race numbers or sponsor decals on top.
These are universal backgrounds rather than model-specific pre-cuts. You choose your width from 12 to 48 inches, then trim the decal to your plate outline during installation. This works for most plates, including aftermarket plastic and non-standard sizes.
Yes. The background is designed as a base layer, so numbers, class letters, and sponsor decals can be applied on top once the background is fully pressed down and trimmed.
Matte has a flat, low-sheen finish that reduces glare, while gloss has a shiny, high-contrast look. Both use the same cast vinyl and laminate, so it comes down to the appearance you want for your build.
12", 18", 24", 36", 48"
Your shopping cart is empty
Notifications
