Gloss Vinyl Stripe Pair for Subaru Crosstrek Decals

Description

A pair of gloss vinyl racing stripes cut to fit the Subaru Crosstrek, sold in your choice of 4, 8, 12 or 18 inch decal sizes. A clean way to add a custom look to your hatch, hood or tailgate.

A Matching Stripe Pair for Your Subaru Crosstrek

This kit includes two identical gloss vinyl stripes designed as a matched pair, so you can run them down the hood, roof and tailgate of your Subaru Crosstrek in a symmetrical layout. Each stripe is cut from Cast Vinyl with a high-shine gloss finish that reads as a painted-on accent once installed. Because they are sold as a pair, you get a consistent width and shape on both sides of the vehicle without trimming guesswork. Choose the decal size that matches your vision, from a subtle 4 inch accent to a bold 18 inch stripe. Not affiliated with or endorsed by the manufacturer.

Why Gloss Vinyl Works on a Crossover

The gloss finish sits closest to the look of factory automotive paint, which is why it is the most popular choice for stripe applications on crossovers like the Crosstrek. Light reflects off the surface the same way it does off your clear coat, so the stripes blend into the body rather than sitting on top of it. The Cast Vinyl conforms to gentle body curves, door handles and panel gaps with modest heat from a hair dryer or heat gun. Applied wet or dry, the material repositions during installation, giving you time to get the spacing between the two stripes exactly even before the adhesive sets.

Installing Your Subaru Decals

Start with a clean, dry surface, free of wax and polish, ideally applied in moderate temperatures out of direct sun. Position one stripe first, then use it as a reference to set the second so the pair stays parallel across the hood and roof. A tape hinge along the top edge lets you check alignment before committing. Squeegee from the center outward to push out air and moisture, then remove the transfer tape slowly at a low angle. On the tailgate, work around the Graphic area by trimming lightly with a fresh blade if needed. Full instructions ship with every pair.

Sizing, Care and Ordering

Every pair is made to order in our and ships as two individual decals on transfer tape, ready to apply. Pick your decal size at checkout: 4, 8, 12 or 18 inches. Smaller sizes work well as accent stripes on the mirrors, fenders or rear glass, while the larger sizes carry the full length of the hood and roof. To keep the gloss finish looking its best, wash by hand with mild soap and a soft cloth, and avoid high-pressure spray directly at the stripe edges. If you are browsing more subaru decals for your build, this pair pairs well with our other Crosstrek-compatible graphics.

What you get

• Sold as a matched pair of two identical gloss vinyl stripes
• Cut from Cast Vinyl with a high-shine gloss finish
• Available in 4, 8, 12 or 18 inch decal sizes
• Conforms to body curves with modest heat during installation
• Repositionable during application for even spacing between the pair
• Made to order in the USA and ships with installation instructions

Specifications

Frequently asked questions

Will these stripes fit my Subaru Crosstrek?

The pair is designed as a stripe accent for the Crosstrek body style and is trimmable during installation, so you can adjust length around panel gaps, handles and the tailgate Graphic. Not affiliated with or endorsed by the manufacturer.

What size should I choose?

The 4 and 8 inch sizes work best as accents on fenders, mirrors or rear glass, while 12 and 18 inch sizes suit full hood-to-tailgate stripe runs. The size refers to the decal dimensions as listed at checkout.

Can I remove the stripes later?

Yes. Warm the vinyl with a hair dryer or heat gun and peel it away slowly at a low angle. Any remaining adhesive can be cleaned off with a mild adhesive remover and a soft cloth.