Gloss Rally Stripe Window Decal Kit for Subaru Forester

Description

A pair of gloss vinyl rally stripe decals cut to dress up the side windows of your Subaru Forester. Choose from 4, 8, 12 or 18 inch stripe lengths to match your build.

Rally Stripes That Fit the Forester Look

This two-piece rally stripe kit brings a motorsport-inspired accent to the side glass of your Subaru Forester. Each stripe is cut from Cast Vinyl with a gloss finish that reads clean against window tint or clear glass, giving the kind of contrast you see on rally-prepped cars without any permanent paint work. The angled rally cut and paired layout are designed to complement the Forester's window line, so the stripes look intentional rather than stuck on. Whether your SUV is a weekend trail rig or a daily commuter, this is an easy way to add personality. Browse our full subaru decals collection for more stripe styles and window graphics that pair well with this kit.

Choosing Your Stripe Length

The kit is sold by decal size, with four options: 4, 8, 12 or 18 inches. Shorter stripes sit tight along the trailing edge of the glass for a subtle accent, while the longer cuts sweep further across the window for a bolder rally look. Measure the flat glass area you want to cover before ordering, keeping in mind window curves and door frame trim. The 8 and 12 inch lengths are popular middle-ground choices for side windows, while the 4 inch works well on quarter glass or as a small detail. Both stripes in the pair are cut to the same length for a symmetrical left and right install.

Gloss Cast Vinyl, Built for Daily Driving

Each stripe is printed and cut on Cast Vinyl with a gloss surface that holds its shine through washes and weather. The material conforms to the gentle curvature of side glass and resists fading under regular sun exposure, so the color stays true season after season. Application is a standard peel-and-stick process with transfer tape: clean the glass, position the stripe, squeegee it down, and pull the carrier away. The adhesive grips firmly but the decal can be removed cleanly when you want a change, leaving no residue behind with proper removal. Full step-by-step instructions ship with every kit.

Installation Tips for a Clean Rally Look

For best results, install on a dry day with glass at moderate temperature, out of direct sun. Wipe the window with isopropyl alcohol and a lint-free cloth to remove wax, dust and fingerprints. Use painter's tape to tack the stripe in place and check alignment against the window edge before committing, then work from the center outward with a squeegee to push out air. Repeat on the opposite side, stepping back to compare the mirror placement. Avoid washing the vehicle for the first 48 hours so the adhesive fully sets. With careful alignment, the pair reads as a matched rally set from curb distance.

What you get

• Two-piece gloss rally stripe pair, one for each side of the vehicle
• Cut from Cast Vinyl with a high-shine gloss finish
• Available in 4, 8, 12 or 18 inch decal sizes
• Peel-and-stick application with transfer tape included
• Conforms to curved side glass on the Forester
• Removable without leftover residue when done correctly
• Printed and shipped by our US-based

Specifications

Frequently asked questions

Do these stripes fit every Subaru Forester generation?

The kit is cut as a universal rally stripe pair rather than a vehicle-specific template. Measure your window glass and choose the 4, 8, 12 or 18 inch size that fits the flat area you want to cover. Not affiliated with or endorsed by the manufacturer.

Will the gloss finish match my window tint?

The gloss surface has a shiny, wet-look sheen that reads well against both tinted and clear glass. It is a smooth Cast Vinyl finish with no texture, so it sits flush against the window surface.

Can I remove the stripes later?

Yes. Warm the decal gently with a hair dryer and peel it away slowly at a low angle. Any remaining adhesive can be cleaned off with isopropyl alcohol, leaving the glass ready for a new set.