By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A matte black Vinyl Decal set styled for the Subaru Sambar kei van, for owners who want a clean, understated look. Cut from Cast Vinyl in your choice of 4, 8, 12 or 18 inch sizes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
The Subaru Sambar has a boxy, compact silhouette that lends itself well to simple graphics, and this decal set was drawn with that body style in mind. The matte finish keeps things low-key: no shine, no gloss, just a flat black outline that reads clearly against paint without shouting for attention. Each piece in the set is cut to work with the van's flat panels and trim lines, so you can place a single large decal on a side panel or break the set up across doors and rear panels. Choose the size that fits your build, from a subtle 4 inch accent to an 18 inch statement piece. Not affiliated with or endorsed by the manufacturer.
These decals are printed on Cast Vinyl, a thin, flexible material that conforms to gentle curves and body contours without lifting at the edges. The matte surface resists glare in direct sunlight, which helps the Graphic stay legible in photos and in person. Application is a standard peel-and-stick process using transfer tape: clean the panel, position the decal, squeegee it down, and peel the carrier away. The vinyl adheres to factory paint, clear coat and smooth primed surfaces. Once applied, the decal sits flush with the panel, giving the appearance of a painted Graphic rather than a stuck-on sticker.
Kei vans have limited panel real estate, so picking the right size matters more than it would on a full-size truck. The 4 inch size works well near Graphic, on quarter panels or inside window areas. The 8 inch size suits lower door sections and rear panels. The 12 inch size fills a side panel on a Sambar without crowding the wheel arch. The 18 inch size is the boldest option and is best reserved for the long flat stretch between the wheels or across a rear barn-door panel. Measure your intended spot before ordering, since trim lines and body seams can eat into the usable space.
Apply the decals in a dry, dust-free spot when panel temperatures are moderate; extreme cold or heat makes vinyl harder to position. Use a felt-edge squeegee or a soft card to press the decal down, working from the center outward to push out air. If a small bubble remains, a fine needle at the edge lets the air escape without lifting the Graphic. For care, wash around the decals by hand or with a gentle rinse rather than high-pressure spray aimed directly at the edges. Avoid waxes and cleaners with strong solvents on the decal surface. With reasonable handling, the matte finish stays looking flat and clean.
The set is drawn to suit the Sambar's general body style, but panel space varies between generations. Measure the area where you plan to place the decal and compare it to the size options before ordering. Not affiliated with or endorsed by the manufacturer.
Yes. Warm the decal gently with a hair dryer and peel it up slowly from one edge. Any remaining adhesive can be cleaned off with a mild adhesive remover. Avoid using sharp tools that could scratch the paint.
They adhere best to smooth, clean surfaces such as factory paint, clear coat and primed panels. Textured plastics and heavily curved surfaces are not ideal for large sizes, so choose a smaller size for tighter spots.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
