By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
This custom student driver sticker is a die-cut gloss vinyl decal personalized with the learner's name. It is made for new drivers and their families who want a clear, friendly heads-up on the road. You can see the rest of the new driver decals here.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
Learning to drive takes practice, and a little patience from other drivers helps. This custom student driver sticker puts the message right on the car, personalized with the learner's name so it feels like their own. It is a die-cut decal, which means there is no background material, just the lettering and graphics themselves. The gloss vinyl has a smooth, shiny finish that stands out against glass and paint. It goes on the rear window, bumper, or rear quarter panel, anywhere following drivers will see it. Because it is cut to shape rather than printed on a rectangle, it looks clean and intentional once installed, not like a temporary label slapped on the car.
The sticker comes in three sizes: 8 inch, 12 inch, and 18 inch. The 8 inch size suits smaller cars, compact hatchbacks, or a corner of a rear window where you want the message present but not dominating. The 12 inch is a comfortable middle ground for most sedans, crossovers, and SUVs, readable from a normal following distance without overwhelming the glass. The 18 inch works well for trucks, vans, or drivers who want maximum visibility, such as teens practicing in busy traffic. Measure the spot where you plan to place it before ordering, and remember the name adds length to the overall cut. When in doubt, the middle size fits most vehicles.
Start with a clean, dry surface. Wash the area with mild soap and water, then wipe it down with rubbing alcohol and let it dry completely, since dust and wax keep vinyl from gripping. Hold the decal in position with a strip of masking tape to check placement before committing. Peel the backing paper away, and the transfer tape keeps the letters aligned. Press the decal down from the center outward with a squeegee or the edge of a credit card, working air toward the edges. The removable adhesive lets you reposition during install if the first placement is crooked. Rub over the transfer tape firmly, then peel it away slowly at a shallow angle.
Once applied, the decal needs very little attention. Avoid washing the car for the first 48 hours so the adhesive fully bonds. After that, hand washing is the gentlest option, and automatic car washes with soft brushes are generally fine. Skip pressure washing directly at the decal's edges and avoid scraping it with ice scrapers or brushes in winter. The gloss finish wipes clean with a damp cloth, so road grime and dust come off easily. If the sticker gets scuffed, do not pick at it, since lifting an edge can shorten its life. With reasonable care, it stays looking sharp through the whole learning period.
This decal is made for the people around a new driver, which is a bigger group than you might think. Parents of teens with a permit can add it to the family car the teen practices in, and remove it cleanly once the license test is passed. Adult learners returning to driving later in life often appreciate the extra space other drivers give. Driving schools and instructors can personalize decals for each student vehicle. It also works as a practical gift for a new driver, paired with a set of keys or a first-lesson card. Anyone who wants other motorists to slow down and be patient around a learner will get daily use from it.
No. The decal uses removable adhesive, so it lifts off without residue when you are ready to take it off. Peel it slowly at a shallow angle, ideally on a warm day or after the car sits in sun, and the adhesive releases cleanly. Any small bits left behind come off with mild soap and a soft cloth.
Measure the spot where the decal will go, and remember the name adds to the overall length. The 8 inch suits small cars and window corners, the 12 inch fits most sedans and SUVs, and the 18 inch is best for trucks, vans, or maximum visibility. When unsure, the 12 inch works for most vehicles.
The removable adhesive is designed for one clean removal, so it peels off without residue when the learner passes their test. It is not intended for repeated transfers to different vehicles, since the adhesive weakens after removal. If you need it on a second car, ordering another decal is the better route.
Wait about 48 hours after applying before the first wash so the adhesive fully bonds. After that, hand washing is gentlest, and soft-brush automatic washes are generally fine. Avoid direct pressure washing at the decal's edges and keep ice scrapers and snow brushes away from it in winter.
8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications