By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
Tesla owners order these decals to personalize a body that comes from the factory with almost no badging or trim variation. A Model 3 and a Model Y share clean, flat panel surfaces that hold cut vinyl well, so a single decal can run on a door, quarter panel, or rear liftgate without contour work.
Tesla owners order these decals to personalize a body that comes from the factory with almost no badging or trim variation. A Model 3 and a Model Y share clean, flat panel surfaces that hold cut vinyl well, so a single decal can run on a door, quarter panel, or rear liftgate without contour work. This collection covers full-size graphics for the trunk and frunk lid, mid-size pieces for doors and fenders, and small accents for mirrors, quarter glass, and the area around the charge port. Every decal is cut from outdoor-rated vinyl, sized in inches, and shipped flat from our US facility.
Decals in this collection are designed around the panel shapes and proportions of the Model 3, Model Y, Model S, and Model X. That means sizing that fits the liftgate width on a Model Y without wrapping over the badge, and placement options that account for the charge port door on the driver side rear quarter. You will find text-based pieces, logo-style graphics, racing stripes, pinstripes, and accent kits sized for mirrors and trim.
The collection suits daily drivers who want a removable customization, Tesla owners prepping a car for shows or meets, and anyone covering a paint correction area or adding visibility accents for night driving. If you drive a different vehicle, our Car & Truck Decals category covers broader fitment.
Flat panels like the Tesla liftgate, doors, and hood take calendered vinyl, a 2.5 mil gloss film with a permanent solvent adhesive rated for roughly five to six years of outdoor exposure. It is the standard choice for most decals in this collection.
For curved areas such as the front bumper crease, mirror caps, or the rear quarter around the charge port, cast vinyl is the better option. Cast film is thinner and stretches without whitening, and versions with an air-release liner let trapped air channel out during installation instead of forming bubbles.
Finish options include matte, gloss, clear and static cling. A gloss laminate layer is worth considering for a car that sits outside in southern sun.
Measure the flat area before ordering. Useful reference points: the rear liftgate of a Model Y offers roughly 40 to 44 inches of usable width between the taillights, the front door flat measures about 18 to 20 inches wide by 10 to 12 inches tall, and the frunk lid on a Model 3 gives around 40 inches of clear width.
On the Model 3 and Model Y, keep decals at least 1 inch away from the door handle recess and the charge port door edge so the film edge does not catch on opening panels.
Steps for a standard dry application on a flat Tesla panel:
For care, hand wash with mild soap, avoid automated brush washes on large graphics, and reposition promptly if an edge lifts. Removal with heat works best on warm days.
A short decision list:
If you want graphics for other vehicles, related silos include American Flag Decals, Camo Decals, Chevrolet & GMC Decals, and Decal Kits.
Tesla factory paint handles vinyl removal well if you use heat from a heat gun or hair dryer on low and pull the film slowly at a shallow angle. Warm the decal to about 120 to 150 degrees Fahrenheit, peel gradually, and clean residue with isopropyl alcohol. Avoid picking at cold edges, which can lift paint on any repainted or repaired panel.
Install above 50 degrees Fahrenheit whenever possible. Below that, adhesive tack drops and edges lift later. If you must install in cold weather, work in a garage, warm the panel surface and the decal before application, and use extra squeegee pressure. Full adhesion takes longer in cold conditions, so wait 48 hours before washing.
The Highland Model 3 keeps the same door and quarter panel proportions as earlier cars, so standard 8 to 12 inch door placements and rear quarter graphics fit the same. The redesigned front fascia has more curvature, so choose cast vinyl with an air-release liner for anything on the nose or bumper rather than a stiffer calendered film.
Small bubbles under calendered film can be punctured at the edge with a pin and pressed flat with a squeegee wrapped in a soft cloth. On cast vinyl with an air-release liner, most bubbles channel out during installation if you work from the center outward. Do not slice large bubbles with a blade, as cuts weaken the film edge.
Most decals in this collection use a permanent adhesive, which still removes cleanly with heat within the rated outdoor life of the film. If you lease your Tesla or plan to sell soon, ask about our removable adhesive options on select sizes. Removable films are better for short-term use but have lower outdoor ratings.
Decals ship flat in a rigid mailer from our US facility, typically within one to three business days after the order is cut. Standard shipping arrives in three to seven days depending on your distance from our shop. Full-width stripe kits and oversized graphics may ship rolled, which can add a day for handling.
Your shopping cart is empty
Notifications
