Matte Black Racing Stripe Decal Kit for Model S

Description

A matte black racing stripe decal kit cut from Cast Vinyl, sized for owners who want a bold dual-stripe look on their sedan. Choose 4, 8, 12 or 18 inch stripe widths to match your build.

Matte Black Racing Stripes for Your Model S

This racing stripe kit gives your Model S a clean, motorsport-inspired look without paint or permanent bodywork. Each kit is cut from matte black Cast Vinyl, so the stripes read as a flat, deep black against your paint instead of a shiny overlay. The set includes a left and right stripe, pre-masked with application tape so both sides go down evenly and stay parallel. Because the vinyl is thin and conformable, the stripes follow the gentle curves of the hood, roofline and trunk without lifting at the edges. It is a weekend project you can finish with a squeegee and a little patience, and the result looks like it came from the factory that way.

Pick Your Stripe Width: 4, 8, 12 or 18 Inches

Stripe width changes the whole attitude of the car, so this kit is offered in four decal sizes. A 4 inch pair reads as a subtle accent line that works with any paint color. An 8 inch set is the classic muscle-car proportion most buyers picture when they think of racing stripes. The 12 inch option makes a stronger visual statement and fills the hood with more presence. The 18 inch pair is the boldest choice, covering most of the center panel for a full race-inspired treatment. All four sizes use the same matte black Cast Vinyl and the same two-piece layout, so you are only choosing how loud you want the statement to be.

How the Matte Finish Works With Your Paint

Matte black has a specific advantage over gloss on striped cars: it does not compete with your clear coat. On a glossy vehicle, a gloss stripe can pick up reflections that blur its edges and make it read as a sticker. A matte stripe absorbs light instead, so the crisp cut edges stay visible from every angle and the color underneath stays the hero. On white, red, blue or gray paint, the contrast is sharp and Graphic. The flat finish also hides minor dust and water spotting better than a gloss surface during everyday driving. If you later want a different look, we also cut this stripe design in gloss, clear and static cling versions.

Model Car Decals Made to Order in Our

Every kit in our model car decals collection is printed and cut to order in our US, including this stripe set. We do not stockpile pre-cut inventory, so your kit is produced after you order with fresh Cast Vinyl and shipped with printed instructions. The kit arrives as a left stripe, a right stripe, application tape and a small squeegee card. Before installation, wash the paint with dish soap and water, dry it fully, and work in a garage or shaded driveway out of direct sun. Warm the vinyl slightly with a hair dryer on curved sections to help it conform, and keep the car dry for the first day so the adhesive bonds properly.

What you get

• Matte black Cast Vinyl with a flat, non-High-Visibility finish
• Available in 4, 8, 12 or 18 inch stripe widths
• Left and right stripe pair for a balanced dual-stripe layout
• Pre-masked with application tape for aligned installation
• Conformable vinyl follows hood, roof and trunk contours
• Cut to order in our US and shipped with instructions
• Removable without paint damage when installed on factory clear coat

Specifications

Frequently asked questions

Will these stripes fit my specific model year?

The kit is cut as a universal dual-stripe layout for the Model S body style rather than a year-specific pattern. Measure the center width of your hood before ordering and choose the 4, 8, 12 or 18 inch size that fits within it. Trim with a sharp blade at panel gaps during install if needed.

Can I wash my car after installing the stripes?

Wait about 24 hours after installation before washing so the adhesive fully bonds. After that, hand washing is the safest method. Avoid high-pressure spray nozzles aimed directly at the stripe edges, and skip automatic brush washes, which can catch and lift the vinyl.

How do I remove the stripes later?

Warm the vinyl with a hair dryer or heat gun on a low setting and peel slowly at a shallow angle. Warm adhesive releases cleanly from factory clear coat. If any residue remains, roll it off with your thumb or a small amount of adhesive remover on a microfiber cloth.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.