By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A full-body racing stripe decal kit cut from Cast Vinyl, made for Model X owners who want a bold two-tone look without a paint. Choose the stripe width that fits your build, from 4 to 18 inches.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This kit is designed around the long roofline and wide body panels of the Model X, so the stripes run from the hood, over the roof, and down the tailgate in one continuous visual line. Instead of guessing at widths, you pick the decal size that matches the look you want: a slim 4-inch pair for a subtle accent, 8 or 12 inches for a classic motorsport feel, or the full 18-inch set for maximum presence on the road. Each stripe is cut to shape so it can be trimmed to length during installation, letting you line up the pattern around door handles, panel gaps, and charge port placement without cutting into the stripe body itself.
Every kit is printed on Cast Vinyl, which conforms to the gentle curves and panel transitions found along the roof and hood. Matte gives a low-sheen, modern look that pairs well with darker paint. Gloss reads like a painted-on pinstripe and catches light in a way that photographs well. Static cling is a non-adhesive option for drivers who want a temporary look for a weekend event and plan to peel it off afterward. Clear vinyl works when you want the stripe to sit subtly over your factory paint with a light tint effect. All four options use the same cut file, so the shape and fit stay consistent no matter which finish you choose for your build.
Installation works best with two people on a calm, dry day when the surface is clean and around room temperature. Lay each stripe out first to confirm placement, then work from the center outward with a squeegee, letting air escape toward the edges. A light mist of application fluid gives you time to reposition the stripe before it grabs, which is helpful around the roof arch and tailgate seams. Take your time at panel gaps: press the vinyl into the gap rather than stretching it across, so the stripe follows the body line instead of bridging it. Avoid washing the vehicle for the first day or two so the adhesive settles fully into place.
If you found this kit through our collection page, take a moment to browse the other Model X graphics we carry, from side accents to smaller Graphic-style decals that echo the stripe color you choose here. Many customers order a matching pair of door decals in the same finish so the sides and center stripes read as one coordinated design. Because everything is printed in-house on the same Cast Vinyl stock, colors and finishes stay consistent across pieces ordered together. If you are planning a full theme for a car meet or show season, ordering the pieces at the same time helps keep the look uniform from hood to tailgate.
The 4-inch size gives a slim accent line, 8 and 12 inches create a classic racing look, and 18 inches makes the boldest statement. Width refers to each individual stripe in the pair, not the total span.
Yes. Warm the vinyl gently with a hair dryer and peel slowly from one edge. Static cling versions remove with no adhesive at all, which makes them the easiest option for temporary use.
The adhesive bonds best to clean factory paint. On wraps or coated surfaces, test a small area first, and consider static cling if you want a look you can change often.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications