By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
Pair of side stripe vinyl decals sized for the Model 3 body line, cut from Cast Vinyl in matte, gloss, clear or static cling. For owners adding a clean racing-stripe look to their doors.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal pair is cut with a tapered stripe profile that sits along the lower door line, giving your Model 3 a subtle motorsport accent without overwhelming the paint. Each stripe is precision-cut from Cast Vinyl so it lays flat over body panels and gentle curves without lifting at the edges. You choose the finish: matte black for a low-key contrast against bright paint, gloss for a painted-on look, clear for a protective accent, or static cling if you want a temporary option you can peel off anytime. Sold as a left and right pair so both sides of the car match. Part of our model car decals collection built for specific vehicles rather than generic one-size strips.
Every car and every owner wants a different amount of coverage, so these stripes come in four lengths. The 4 inch pair works as a small accent near the front fender. The 8 inch set covers the door crease area. The 12 inch stripes extend across most of the door panel, and the 18 inch pair stretches from the fender toward the rear quarter for a fuller racing look. All four sizes share the same tapered cut and finish options, so you can pick the footprint first and the look second. If you are unsure, the 12 inch set is a popular middle ground that reads clearly without dominating the side profile of the car.
Matte black is the quiet choice, absorbing light so the stripe reads as a shadow line along the door. Gloss matches a clear-coated paint finish and blends in like it was sprayed on. Clear vinyl adds a barely-there accent that also helps shield that strip of paint from light scuffs. Static cling uses no adhesive at all, holding to the panel by surface attraction, which makes it the right pick for leased cars, car shows, or anyone who wants to remove the stripes in seconds with no residue. All finishes are cut to the same stripe shape, so the look stays consistent whichever one you choose.
Start with a clean, dry panel washed free of wax and dust, and work in shade so the surface is cool. Position each stripe with masking tape as a hinge, check that it sits parallel to the body line, then peel the backing and smooth it down from the center outward with a squeegee or soft card. Cast Vinyl conforms to the slight curvature of the door without heat for most installs. Avoid washing the car for the first day or two so the adhesive sets fully. Static cling installs the same way but needs an especially smooth, clean panel to grip well. Full step-by-step instructions ship with every order.
The stripe shape is designed to follow the Model 3 door body line, but fit can vary with trim and any body modifications. Measure the area you want to cover and compare it to the 4, 8, 12 or 18 inch length options before ordering.
Matte black gives a subtle contrast look, gloss blends with painted panels, clear is a near-invisible accent, and static cling is best if you want a removable, no-adhesive option.
Yes. Static cling peels off by hand with no residue. Adhesive vinyl can be removed by peeling slowly, ideally in warm conditions, and cleaning any remaining adhesive with isopropyl alcohol.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
