Model 3 Racing Stripes Pair, 18 Inch Vinyl Decal Set

Description

A pair of 18 inch racing stripe decals cut from Cast Vinyl, sized for Model 3 owners who want a motorsport look without a full wrap. Part of our model car decals collection.

Racing Stripes Sized for Your Model 3

This set includes two matching stripe decals, each measuring 18 inches long, designed to sit along the hood or trunk of a Model 3. The pair layout gives you the classic twin-stripe motorsport look in a size that works as an accent rather than a full-length stripe job. Because the stripes are cut individually, you control the spacing between them, so you can run them tight together for a bold line or spread them wider for a wider stance feel. They arrive ready to apply with a premasked transfer layer that keeps both stripes aligned during installation.

Matte, Gloss, Static Cling and Clear Finish Options

Choose the finish that matches your paint and your plans. Gloss stripes read as painted-on against a clearcoat finish, while matte stripes offer a flat, motorsport-inspired contrast that stands out on both light and dark paint. Static cling gives you a temporary option that peels off cleanly with no adhesive residue, which works well for track days, shows, or testing the look before committing. Clear vinyl offers a subtle, tinted-glass effect on darker panels. All four finishes are printed and cut in our on the same Cast Vinyl we use across our model car decals collection.

Applying Your 18 Inch Stripe Pair

Start with a clean, dry surface and work in moderate temperatures, out of direct sunlight. Position each stripe with small pieces of tape before removing the backing, then use a squeegee or a credit card wrapped in a soft cloth to press the vinyl down from the center outward. Peel the transfer tape slowly at a low angle rather than straight up. On curved areas of the hood, go slow and let the Cast Vinyl stretch slightly to follow the contour. If you need to reposition during placement, lift gently rather than pulling hard. Full surface adhesion develops after the vinyl settles, so avoid washing the area for the first day or two.

A Gift Idea for Model 3 Owners

If you are shopping for someone who already has the car and is hard to buy for, a stripe pair is an easy call. It is a small, affordable upgrade that changes the personality of the vehicle without tools, drilling, or permanent modification, which matters for leased cars or anyone cautious about resale. The 18 inch size is a good middle ground in our range of 4, 8, 12 and 18 inch decals, large enough to read at a distance but small enough for a first-time installer. Pair it with other decals from the same collection for a coordinated look.

What you get

• Two matching 18 inch racing stripe decals per set
• Cut from Cast Vinyl for conformability over gentle curves
• Available in matte, gloss, static cling and clear finishes
• Premasked with transfer tape for aligned, easy placement
• Removable without drilling or permanent modification
• Made in the USA and shipped flat to prevent curling

Specifications

Frequently asked questions

Will these fit the hood of my Model 3?

The 18 inch stripes are sized as hood or trunk accents. Measure the area you want to cover before ordering, and check our other size options (4, 8, 12 or 18 inches) if you need a different length.

Can I remove the stripes later?

Yes. Warm the vinyl gently with a hair dryer and peel it away slowly. Static cling finishes remove with no adhesive at all, which makes them the best choice for a temporary look.

What is the difference between matte and gloss?

Gloss stripes have a shiny, painted-on appearance that blends with clearcoat paint. Matte stripes have a flat finish that contrasts with glossy paint and gives a more understated motorsport look.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.