By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
Ram pickups and the Dodge Durango are two of the most decal-friendly vehicles on the road. Ram owners tend to focus on the tailgate, rear window, and bed sides, where large horizontal graphics and lettering read well from a distance.
Showing all 6 resultsSorted by popularity
Ram pickups and the Dodge Durango are two of the most decal-friendly vehicles on the road. Ram owners tend to focus on the tailgate, rear window, and bed sides, where large horizontal graphics and lettering read well from a distance. Durango owners usually want something different: door accents, rear quarter decals, and window lettering that suit the SUV proportions. Both vehicles have flat, open panels that make vinyl application straightforward compared to curved sedans. Whether you are after a hunting or fishing theme, a subtle pinstripe, a full tailgate graphic, or a family name sticker for the rear glass, this collection covers the placements and sizes that work on these body styles. Measure your own panels before ordering.
On Ram pickups, the tailgate is the single most requested location. The area between the taillights and below the tailgate lettering handles wide, short graphics. Bed sides and the rear window are close behind, and rocker panels along the lower doors are common for longer stripes. The Durango, being an SUV with a liftgate instead of a tailgate, works best with liftgate lettering, rear quarter decals, and door or fender accents. Windshield banners fit both vehicles if the glass width is measured carefully.
Sizes vary by cab configuration, bed length, and generation, so treat the following as starting points and measure your own panels before ordering. A tailgate decal for a full-size Ram pickup is often in the range of roughly 40 to 60 inches wide, while shorter graphics sit around 20 to 30 inches. Bed side and rocker stripes typically run 50 to 80 inches. For the Durango, liftgate lettering commonly falls between 20 and 40 inches wide, door decals around 12 to 24 inches, and rear quarter accents roughly 10 to 20 inches. Windshield banners for either vehicle usually land in the 50 to 70 inch range, trimmed to fit. Always measure the flat area you actually have, accounting for badges, handles, and body lines.
Vehicle panels on trucks and SUVs take more abuse than most surfaces, so material choice matters. Printed vinyl decals are available in matte, gloss, static cling, and clear finishes, and outdoor use is possible with printed vinyl applied to clean, dry surfaces. Matte hides minor scratches on rocker panels and bed sides, while gloss reads cleaner on tailgates and liftgates. Cast vinyl conforms better over body lines and slight curves, such as Durango rear quarters, while calendered vinyl is a budget-friendly option for large flat areas. For rear glass, static cling offers a removable option that avoids adhesive residue on the window.
Both vehicles have mostly flat panels, which makes DIY installation realistic with care. Clean the surface with isopropyl alcohol and let it dry fully. On the Ram tailgate, work around the badge and handle assembly rather than applying over it, or plan to trim the vinyl with a hobby knife after application. Rocker panels on both vehicles sit low and collect road film, so extra cleaning time pays off. On the Durango liftgate, apply from the center outward to push air toward the edges, and avoid stretching vinyl across the panel gaps around the taillights. Apply above 50 degrees Fahrenheit and avoid waxed surfaces. Wait several days before pressure washing.
No. Tailgate dimensions vary across cab configurations, bed lengths, and generations. The ranges listed here are starting points only. Measure the flat area on your own tailgate, accounting for the badge, handle, and existing lettering, then choose a decal that fits within those measurements.
Often not directly. A pickup tailgate is a wide, short panel while the Durango liftgate is taller with a different width. Decals designed for a truck tailgate may be too wide. Check the decal dimensions against your measured liftgate area, or look for SUV-specific sizes in the collection.
Quality outdoor vinyl applied to clean, unwaxed surfaces and removed with heat generally comes off without harming factory paint or glass. Problems usually come from applying over dirt or removing cold vinyl in direct sun. Warm the decal with a hair dryer or heat gun on low and peel slowly at an angle.
Most vinyl manufacturers recommend applying above roughly 50 degrees Fahrenheit. Cold vinyl is stiff, adheres poorly, and can lift later. If temperatures are low, work in a heated garage and let the vehicle and decal both reach room temperature before starting. Wait several days before washing.
Your shopping cart is empty
Notifications
