By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A matte wall decal shaped like a SUV window frame outline, sized from 4 to 18 inches, made for Durango owners who want garage or man-cave decor that matches their ride.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
Some decals try to show the whole vehicle and end up too busy on a small wall. A window frame outline keeps the Vinyl Cutting Machine clean and recognizable, so even the 4-inch size reads clearly from across the room. If you already display an social sticker for car culture on your laptop or toolbox, this piece brings that same energy to a larger surface. Hang it beside your keys, above a workbench, or in a mudroom where you come in after a drive. The outline style also leaves breathing room on the wall, which matters when you are decorating around posters, plaques, or a tool pegboard. It is a subtle nod to your SUV without taking over the space.
Choose 4, 8, 12, or 18 inches depending on where the decal will live. The 4-inch works on a laptop lid, mirror edge, or toolbox drawer. The 8-inch fits a bedroom door, a shelf back, or a corner of a garage cabinet. The 12-inch suits a hallway wall or the side of a storage bin. The 18-inch makes a statement above a workbench or on a garage wall where you park. Because the design is a single cut outline, it applies in one piece at every size, so you are not lining up multiple segments on the wall. Measure your spot before ordering so the proportions look right next to whatever else hangs there.
This decal is printed on matte Cast Vinyl, which cuts down glare under garage lighting and overhead fixtures. The low-sheen surface helps the outline sit flat visually, almost like it was painted on. Cast Vinyl is thin and conforms to smooth interior surfaces without the thicker feel of calendered material. Apply it to painted drywall, finished wood, glass, metal cabinets, or smooth doors. Skip textured surfaces like brick, stucco, or heavily orange-peel paint, since the edge will not seat fully into that texture. Clean the wall with isopropyl alcohol first, let it dry, and press from the center outward with a squeegee or firm card to push out air.
Plan your placement before peeling the backing. Use painter's tape to hold the decal in position and step back to check the level. Once it looks right, peel slowly and smooth as you go. If a small bubble appears, prick it with a pin and press the air out rather than lifting the whole piece. To remove it later, warm the decal gently with a hair dryer on low and peel at a shallow angle; the matte Cast Vinyl should come away from a painted wall in one piece when removed carefully. Keep in mind that fresh paint should cure for a few weeks before any decal goes on top of it.
When applied to clean, fully cured paint and removed with gentle heat at a shallow angle, matte Cast Vinyl typically comes off painted drywall without residue. Avoid freshly painted walls and textured surfaces.
For a standalone spot above a workbench or near where you park, the 12 or 18 inch sizes read best. The 4 and 8 inch options are better suited to doors, cabinets, laptops, and smaller decor areas.
This listing is cut for indoor wall display. If you want a similar look as an social sticker for car windows or body panels, check the rest of our Ram & Dodge Durango decals collection for vehicle-rated options.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
