By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A gloss Cast Vinyl tailgate decal sized for pickup owners who want a clean, bold accent on the back of their truck. Available in 4, 8, 12 or 18 inch decal sizes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This tailgate decal is printed on gloss Cast Vinyl with a smooth, high-shine finish that stands out against painted sheet metal. It is cut in a size range from 4 to 18 inches so you can pick the look that fits your tailgate, whether you want a small accent near the handle or a wide statement across the panel. The gloss surface wipes clean with mild soap and water and resists everyday dust and road grime better than a bare paint surface. Like the dodge racing stripes we carry for trucks and SUVs, this decal is cut and printed in our and ships ready to apply with transfer tape already in place.
One size does not fit every tailgate, so we cut this decal in four options. The 4 inch size works as a subtle accent near the latch or on a toolbox. The 8 inch size suits smaller tailgates and bed caps. The 12 inch size is the middle ground, filling the space between the handle and the tailgate edge on most full-size trucks. The 18 inch size is the widest option, made for owners who want the Graphic to span most of the tailgate width. Measure the flat area you want to cover before ordering, and remember that the listed size refers to the decal at its longest point.
Application takes a few minutes with basic tools you likely already have. Clean the tailgate with isopropyl alcohol and let it dry fully. Peel the paper backing away while the transfer tape holds the decal together, then position it on the panel. Press from the center outward with a squeegee or a credit card wrapped in a soft cloth to push out air. Work slowly on warm days or after the panel has sat in the sun, since Cast Vinyl conforms better with a little warmth. Peel the transfer tape back at a low angle and the decal stays put. Full instructions ship in the package.
Every decal we sell is printed and cut in our own, so nothing sits in a warehouse for months before it reaches you. We use Cast Vinyl with a gloss finish for this design, along with a matte, clear and static cling option across the rest of our catalog if you change your mind later. Orders ship flat in a rigid mailer to protect the decal during transit. If you are building a bigger look, this tailgate piece pairs with the other truck graphics in our collection, including stripe kits and door accents, so you can match finishes across the whole vehicle.
When removed warm and peeled slowly, Cast Vinyl comes off exterior paint without leaving residue. Any leftover adhesive can be cleaned with isopropyl alcohol. We do not promise a specific removal outcome on repainted or repaired panels, so test a corner first if your paint is not factory-original.
Most full-size tailgates have room for the 12 or 18 inch decal, depending on how much of the panel you want to cover. Measure the flat area between the handle and the tailgate edge, then choose the size that fits inside those measurements with margin on each side.
Yes. It applies to any smooth exterior surface such as a bed panel, toolbox or window. Avoid textured bed liners and plastic trim, since the adhesive bonds best to smooth paint and glass.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
