By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
You just want a decal that fits your F-150 tailgate without looking like it came from a vending machine. This collection covers Ford owners adding graphics to trucks, SUVs and cars: F-150 and Super Duty tailgate lettering, Bronco door decals, Mustang stripe accents, and Ford blue oval replacements.
You just want a decal that fits your F-150 tailgate without looking like it came from a vending machine. This collection covers Ford owners adding graphics to trucks, SUVs and cars: F-150 and Super Duty tailgate lettering, Bronco door decals, Mustang stripe accents, and Ford blue oval replacements. Every decal here is die-cut or printed vinyl sized for specific Ford panels, not generic one-size-fits-all sheets. Whether you are covering a pinstripe, dressing up a tool box, or replacing factory badging that peeled off at the car wash, these are cut to real vehicle dimensions so you can position them once and be done.
This collection includes Ford tailgate decals, door and fender graphics, window decals, hood stripes and replacement badging. It is built for owners of the F-150, F-250 and F-350 Super Duty, Bronco and Bronco Sport, Explorer, Ranger, Mustang and Escape. If you drive a work truck, the tailgate and bed-safe options hold up to daily use. If your Ford is a weekend vehicle, the smaller door and quarter-panel graphics offer a cleaner look. Fleet buyers and small shops can also source multiples here, and the Bulk and Wholesale Stickers collection covers larger volume needs.
Flat panels like tailgates, hoods and doors take calendered vinyl, a 6 mil intermediate film rated for outdoor use around five to six years. Curved surfaces such as fenders, bumper corners and mirror caps conform better with cast vinyl, which stretches without distorting printed graphics. Larger printed decals use an air-release liner so you can push trapped bubbles out during installation instead of lifting and repositioning.
Printed color decals get a gloss or matte laminate over the ink, which gives the surface a gloss or matte finish on vehicles parked outside year-round.
Measure before you order. For tailgate lettering on a 2015 to 2023 F-150, the usable flat area between the handle recesses runs roughly 50 to 54 inches wide, so lettering kits in that range fill the panel edge to edge. Smaller 6 to 8 inch Ford blue oval decals work on tailgates, tool boxes and coolers. Side door graphics for Broncos typically land between 18 and 24 inches wide. Window decals should stay under 12 inches to avoid blocking sightlines and stay legal in states with obstruction laws. For hood stripes on a Mustang, measure the hood center section: most stripe kits are cut for a 28 to 30 inch center band. Leave at least 1 inch of clearance from panel gaps and trim lines so the vinyl does not bridge a seam and lift later.
Steps for a clean install:
Wait 48 hours before washing. Hand wash or use touchless car washes; brush tunnels can peel edges. Avoid pressure washing directly at decal edges. Parked outside constantly? Expect the top layer to show wear sooner on horizontal surfaces like hoods.
Work through this short list:
If you need a size or model not listed, the Custom Stickers collection handles one-off cuts.
Most listings state the model years they are cut for, since panel dimensions changed across generations. Measure the flat area of your tailgate or door and compare it to the listed decal width before ordering. If your year is not listed, a custom cut can usually be made from your measurements.
Installed on factory paint in good condition, quality vinyl removes cleanly with heat from a heat gun or hair dryer on low. Paint that is already failing, repainted panels, or decals left on for many years can pull paint. Warm the decal and peel slowly at a low angle.
Touchless car washes are fine after the first 48 hours. Brush-style washes are the main cause of lifted edges and peeled corners. Hand washing is safest. If you must use a brush wash, avoid decals on leading edges like hood fronts and bumper corners.
Below about 50 F, vinyl loses flexibility and adhesive does not bond properly. Ideally install between 60 and 90 F, either in a garage or on a mild day. In cold weather, warm the panel and the decal with a hair dryer before and during application.
Calendered vinyl is typically rated for five to six years outdoors, and cast films last longer. Horizontal surfaces such as hoods fade faster than vertical ones because they take more sun. A laminate over printed graphics extends color life significantly.
Yes. Multiple quantities of most Ford decals can be ordered directly, and larger fleet or resale volume is handled through the Bulk and Wholesale Stickers collection. Lead times for bulk runs are longer than stock decals, so plan ahead if you need them by a specific date.
Your shopping cart is empty
Notifications
