F-150 Windshield Banner Decal | Ford Truck Vinyl Decal

Description

A windshield banner decal sized and cut for full-size Ford truck glass. Printed on durable vinyl in your choice of matte, gloss, clear or static cling finish.

A Windshield Banner Built for Full-Size Ford Truck Glass

This banner decal is designed with the wide, gently curved windshield of a full-size Ford pickup truck in mind. The lettering is cut and spaced so it reads cleanly across the top of the glass without crowding your view of the road. Whether you drive your truck to the job site, the trail or the car meet, a banner across the windshield is one of the simplest ways to give it a finished, built look. Choose the size that fits your glass, peel, apply and squeegee it down. The vinyl conforms to the slight curve at the top of the windshield for a smooth, bubble-free result when installed with a little care.

Four Finishes: Matte, Gloss, Clear and Static Cling

Every banner is printed on quality cast or calendered vinyl, and you pick the finish that matches your build. Matte gives a low-key, painted-on look that hides glare and works well on trucks with flat or Low-Gloss paint. Gloss adds shine and pops against darker glass. Clear vinyl lets the lettering stand alone with no background, so the banner looks like it was etched right onto the windshield. Static cling uses no adhesive at all, so you can reposition or remove it whenever you like, which is handy if you share the truck or want a temporary look for an event weekend.

How to Install Your Banner Decal

Start with a clean windshield, free of wax, dust and road film. A quick wipe with isopropyl alcohol and a lint-free towel does the job. Position the banner dry first to find your placement, then use the wet method if you prefer extra working time, spraying the glass with a slip solution before laying the decal down. Work from the center outward with a squeegee or plastic card to push out water and air. Let it set before driving, and avoid car washes or heavy rain for the first day so the adhesive can bond fully. Full instructions ship with every order.

Part of Our Ford Truck Decal Collection

This windshield banner pairs naturally with the rest of our truck graphics, including the pieces in our ford bronco decal kit collection and other decals sized for Ford trucks and SUVs. Match a banner with side graphics, tailgate lettering or window decals to build a coordinated look across the whole vehicle, or run the banner on its own for a clean, single-statement style. If you are working on a truck build over time, the banner is a good first piece, since it sets the tone for everything that follows and takes under an hour to install with basic tools you already have.

What you get

• Windshield banner decal cut for full-size Ford truck glass
• Available in 4, 8, 12 or 18 inch decal sizes
• Choice of matte, gloss, clear or static cling finish
• Printed on quality cast or calendered vinyl
• Static cling option removes and repositions without adhesive
• Install with a squeegee using the wet or dry method
• Pairs with other Ford truck decals for a coordinated build

Specifications

Frequently asked questions

What size banner should I choose for my windshield?

Measure the flat, usable area of your windshield between the visors and the trim before ordering. The 18 inch size suits wide truck glass, while smaller sizes work for partial banners or side windows. When in doubt, measure twice.

Will the banner block my view while driving?

Place the banner along the top of the windshield above your sightline. Check local tint and obstruction laws in your state, since rules for decals on windshields vary by jurisdiction.

Can I remove the banner later?

Yes. Adhesive vinyl peels away when lifted from an edge, and any residue comes off with a plastic scraper and adhesive remover. Static cling lifts off cleanly with no residue at all.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.