By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A gloss Cast Vinyl windshield banner decal cut to a wide oversize Graphic that spans your glass. Made for Jeep, truck and SUV owners who want a clean top-of-windshield statement.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This windshield banner decal is printed on gloss Cast Vinyl with a smooth, high-shine finish that reads like it was painted onto the glass. The wide oversize layout is designed to sit across the top of a windshield, so the design carries from pillar to pillar without looking stretched or cropped. Each banner is cut to order in your choice of decal height, letting you pick how much glass you want to cover. The gloss surface catches daylight and headlights, giving the Graphic a crisp, wet-look edge that stands out against tinted or clear glass alike. If you have been shopping jeep windshield decals and want something bigger than a small corner sticker, this banner fills that space.
Every banner is sold by decal height rather than by a single fixed measurement, so you can match the Graphic to your vehicle and your vision. Choose a shorter height for a slim strip along the top of the glass, or a taller height when you want the design to become the focal point of the front end. Because the banner is cut wide, the height you select controls how bold the overall look reads once installed. Measure the clear space between your sun visor line and the top edge of your windshield before ordering, and check your local tint and obstruction laws, since rules on covered glass area vary by state. A quick measurement now saves a re-do later.
This listing is for the gloss version, which delivers that glassy, polished look many drivers want on a show-style build. If you prefer something that disappears into tinted glass, the same banner design is also available in a matte finish that reads flat and low-key under bright sun. Both finishes use the same Cast Vinyl base, so the choice is purely about the look you want on your windshield. Gloss pairs well with clean, detailed artwork because the shiny surface sharpens fine lines and small text. Matte suits larger, bolder shapes and hides fingerprints and water spots better between washes.
Installation is a wet-or-dry apply process with a peel-and-stick backing. Clean the glass thoroughly, hold the banner in place with masking tape to check positioning, then peel and squeegee from the center outward to push out air and moisture. Work in shade on a mild day so the vinyl lays down smoothly. Once set, the banner handles rain, car washes and highway driving like the rest of our Cast Vinyl graphics. Avoid abrasive brushes directly on the edge of the decal, and skip pressure washers up close. When you are ready for a change, warm the vinyl with a hair dryer and peel it away, then clean off any residue with glass cleaner.
Measure the open space between the top edge of your windshield and your sight line or sun visor, then pick the decal height that fits within it. A 4 or 8 inch height gives a slim banner strip, while 12 or 18 inch heights create a bold covered-glass look. Always check your state's rules on windshield obstruction before ordering.
The banner is cut wide so it spans most truck, Jeep and SUV windshields. Because windshields vary in width and curvature, we recommend measuring your glass and confirming the decal height fits your clear space before ordering. Trim-to-fit adjustments can be made during installation with a sharp blade.
Yes. Warm the vinyl with a hair dryer or heat gun on a low setting, then peel it away slowly from one corner. Any leftover adhesive can be cleaned off with glass cleaner and a plastic scraper. Avoid picking at cold vinyl, as it can tear and leave small pieces behind.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
