By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A set of four racing stripe decals cut from Cast Vinyl, ready to apply to your truck, tool box, cooler or laptop. A simple way to add a motorsport look without paint or permanent changes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal pack includes four individual racing stripe decals, so you can run a pair down each side of your truck bed, mirror a set across a tool box, or split them between a trailer and a cooler. Each stripe is cut to the same length in your chosen size, which keeps the layout consistent whether you space them tight or wide. Because they ship as separate pieces, you control the gap between stripes and can trim around handles, body lines or Graphic with a hobby knife after application. Buyers shopping our Ford Bronco decal kit collection often pair this pack with lettering or number decals for a full motorsport layout, but it works just as well on its own for a clean two-stripe-per-side look.
Pick the stripe length that fits your surface before you add the pack to your cart. The 4 inch size suits laptops, tumblers, tool lids and helmet panels. The 8 inch size works well on car doors, motorcycle tanks and storage bins. The 12 inch size covers truck tailgates, cooler lids and rear windows. The 18 inch size is the choice for full-length hood stripes, truck bed panels and trailer sides. Measure the flat area you want to cover before ordering, and remember that you can trim any stripe shorter with a sharp blade after it is applied. All four decals in a pack are cut at the same length you select.
Every pack is printed on cast or calendered vinyl in one of four finishes. Matte gives a low-sheen, painted-on look that blends with flat or Low-Gloss paint. Gloss adds shine that stands out against most factory paint. Clear vinyl prints the stripe artwork on a transparent film, which reads best on glass and darker surfaces. Static cling uses no adhesive at all, so it holds to smooth glass and can be peeled off and repositioned as often as you like, a good pick for renters or leased vehicles. Choose the finish that matches both your surface and how long you plan to keep the stripes in place.
Start with a clean, dry surface, free of wax, dust and grease. Position each stripe with masking tape as a hinge, peel the backing paper, and squeegee from the center outward to push out air. A felt-edge squeegee or a credit card wrapped in a soft cloth works fine. Warm the vinyl slightly with a hair dryer on curved panels to help it conform, then remove the transfer tape slowly at a low angle. Wait about a day before washing the area. For static cling, just mist the glass with water, press the decal in place and squeegee out the moisture. Full instructions ship in every pack.
Yes. The 12 and 18 inch sizes are the most common picks for hoods and truck bed panels. Clean the surface well, and use a hair dryer on low to help the vinyl conform over curves.
Matte, gloss and clear finishes use adhesive and are meant for longer-term display. Static cling has no adhesive and sticks to smooth glass only, so it peels off and repositions easily, which suits leased vehicles or seasonal use.
Yes. Once the decal is applied and the transfer tape is removed, you can trim the ends with a sharp hobby knife to fit around Graphic, handles or panel edges.
Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
