Personalized Logo Decal 12 Inch | Custom Vinyl Stickers

Description

Turn your logo, artwork, or lettering into a die-cut Vinyl Decal, available in 4, 8, 12, or 18 inch sizes. Made to order in our for small businesses, creators, and everyday branding.

Your Logo, Cut to Shape in a 12 Inch Decal

Send us your artwork and we cut it as a single die-cut decal sized to your choosing. The 12 inch option is a popular middle ground: large enough for a storefront window, a vehicle door, or the side of a cooler, yet still easy to position by hand. We work from clean vector files when you have them, and we can also cut from high-resolution images depending on the design. Each decal is produced after you order, so what arrives reflects your file, not a stock template. If your artwork has multiple colors separated into layers, we assemble them so the finished piece applies as one transfer. This is a straightforward way to get a professional-looking version of your mark without ordering a full print run.

How Our Custom Vinyl Stickers Are Made

Every decal starts as your uploaded file, which we review for cut paths and size before production. We cut from cast or calendered vinyl depending on the finish you select, then weed the excess material by hand and apply transfer tape so the whole design lifts off the backing in one piece. Matte finishes read soft and low-glare, gloss adds shine and punch, clear vinyl blends onto glass and smooth surfaces, and static cling gives you a repositionable option that peels off without adhesive residue. Because we finish each order individually, small tweaks like adjusting cut size within your selected option are often possible if you message us before production begins.

Choosing Between 4, 8, 12, and 18 Inch Sizes

Size is measured at the decal's longest dimension, so a 12 inch logo with a wide horizontal layout will be 12 inches across, while a square design will be 12 inches tall. The 4 inch size suits tumblers, laptops, and hard hats. The 8 inch works well on toolboxes, mirrors, and smaller windows. The 12 inch is our go-to recommendation for vehicle panels and entry doors where the logo needs to read from a short distance. The 18 inch suits trailers, walls, and larger glass. If your artwork is tall and narrow, keep in mind the short side scales down proportionally, so fine details may get small at the 4 inch end.

Applying Your Personalized Logo Decal

Application works best on a clean, dry, smooth surface at moderate room temperature. Wash the area, remove any wax or residue, and let it dry fully. Peel the backing away so the decal stays on the transfer tape, position one edge first, and smooth outward with a squeegee or card to push air toward the edges. Work slowly on larger sizes like the 12 and 18 inch, and lift and reposition if needed before pressing everything down. Remove the transfer tape by pulling it back on itself at a shallow angle. Wait before washing or exposing the area to pressure. Full instructions ship with every order.

What you get

• Die-cut from your own logo or artwork, made to order
• Available in 4, 8, 12, and 18 inch decal sizes
• Choose matte, gloss, clear, or static cling vinyl
• Transfer tape included so multi-piece designs apply as one
• Cut from cast or calendered vinyl, printed in our US
• Suitable for windows, vehicles, doors, walls, and smooth surfaces
• Application instructions included with every order

Specifications

Frequently asked questions

What file should I upload for my logo decal?

Vector files such as AI, EPS, SVG, or PDF with outlined paths give the cleanest cut. High-resolution PNG or JPG images can also work for simpler designs. After you order, we review your file and will contact you if anything needs adjusting before we cut.

Is the 12 inch size measured by width or height?

The size you select refers to the longest dimension of the finished decal. A wide logo will be 12 inches across; a square or vertical design will be 12 inches tall. The other side scales proportionally to your artwork.

Can I remove the decal later?

Adhesive-backed decals are intended for longer-term use and are removed by peeling at a shallow angle, ideally with gentle heat from a hair dryer. Static cling finishes peel off cleanly with no residue and can be repositioned, which makes them a good choice for glass you may want to change.