By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
You have a logo, a sketch, or a photo, and you want it as a real vinyl sticker, not a flimsy paper label. This collection covers made-to-order vinyl stickers printed from your artwork and cut to your shape.
Showing all 14 resultsSorted by popularity
You have a logo, a sketch, or a photo, and you want it as a real vinyl sticker, not a flimsy paper label. This collection covers made-to-order vinyl stickers printed from your artwork and cut to your shape. Upload vector files for the cleanest results or send high-resolution raster images for photo-based designs. You choose the material, finish, and size, and whether you want die cut singles, kiss cut stickers on a backing sheet, or sheets of multiple designs. These work on laptops, water bottles, car windows, toolboxes, storefront glass, and packaging seals. Every sticker in this collection is produced after you order, so nothing here sits in a warehouse waiting for a design that is not yours.
Custom vinyl stickers means stickers made from your artwork rather than designs we supply. That includes single die cut stickers with a custom outline, kiss cut stickers that peel off a rectangular backing sheet, and full sheets with several designs on one carrier. This collection is the general-purpose entry point: it suits small businesses ordering branded stickers, artists selling sticker packs, event organizers, and individuals who want one or two stickers of a personal design.
If your project is more specific, a sibling collection may fit better. Custom Bumper Stickers and Custom Car Stickers cover vehicle-rated material and larger formats. Custom Die Cut Stickers goes deeper on contour cutting. Custom Laptop Stickers, Custom Logo Stickers, Custom Name Stickers, Custom Photo Stickers, and Custom Text Stickers each narrow the use case further. This page stays general so you can compare material and cut options in one place.
Two vinyl families matter here. Calendered vinyl is a 5 to 7 year intermediate film. It is the standard choice for most custom stickers: durable, affordable, and thick enough at roughly 2.5 mil to handle frequent handling. Cast vinyl is thinner, more conformable, and rated longer, roughly 7 to 10 years outdoors. Cast is the better pick for curved surfaces or anything you expect to keep on a vehicle for years.
For printed stickers, the ink sits on white vinyl and gets a protective laminate. A gloss laminate gives high shine and makes colors pop. A matte laminate cuts glare and looks more like screen print. Clear vinyl offers a borderless look where the design blends with the surface, and static cling mounts without adhesive for temporary use. Many printed stickers ship on an air-release liner, which has micro channels in the adhesive that let trapped air escape during application. That reduces bubbles, especially on larger stickers.
Match the sticker size to the object, not the artwork file. A laptop lid usually fits stickers in the 2 to 4 inch range, with room for a cluster of three to five. A water bottle with a 3 inch diameter wraps cleanly with a 2 to 3 inch wide sticker. Phone cases take 1 to 2 inches. Car windows and bumpers are the place for 6 to 12 inch stickers, since anything smaller gets lost at distance. Storefront glass and toolboxes can take 12 inches and up.
Leave breathing room around your design. Fine details and thin lines below roughly 0.1 inch often do not survive contour cutting. If your design has text, keep it at least 0.25 inch tall so it stays legible after printing. For full-bleed designs, extend your artwork about 0.125 inch past the cut line on all sides so no white edge shows if the cut drifts slightly. When in doubt between two sizes, go smaller: a sticker that fits its surface looks intentional, one that overhangs looks applied by accident.
Step 1: Clean the surface with isopropyl alcohol and a lint-free cloth. Soap residue and wax repel adhesive. Step 2: Let the surface dry fully. Step 3: Position the sticker without removing the backing, using a strip of masking tape along one edge as a hinge if you need to check alignment. Step 4: Peel the backing, starting from the hinge side, and lay the sticker down slowly. Step 5: Squeegee or press from the center outward with a card wrapped in a soft cloth. If the liner is air-release, press firmly and work bubbles toward the nearest edge rather than trying to lift the vinyl. Step 6: For vehicle applications, avoid washing for 48 hours so the adhesive cures.
For care, hand washing is safest for all of these. Dishwashers and pressure washers at close range can damage printed vinyl, including laminated ones. On cars, park in shade when possible, since sun exposure can fade printed inks over time. To remove a sticker later, warm it with a hair dryer and peel slowly, then clean off adhesive residue with isopropyl alcohol.
Work through this short list before ordering:
Vector files such as AI, EPS, or PDF with outlined text give the cleanest cut lines and can scale to any size without blur. If you only have a raster image like a JPG or PNG, send it at 300 DPI or higher at the final print size. For kiss cut stickers, include the cut line as a separate layer or path if your software allows it.
A die cut sticker is cut all the way through the vinyl and the backing, so the backing matches your shape. A kiss cut sticker is cut through the vinyl only, leaving it on a larger backing sheet you peel it from. Die cut looks better as a finished product. Kiss cut is easier to peel, protects the sticker edge, and suits handing out sheets at events.
Laminated vinyl stickers hold up outdoors for years, with calendered vinyl rated around 5 to 7 years and cast vinyl around 7 to 10. Dishwashers are harder on them than weather, because heat and detergent attack the adhesive. Hand washing is the safe choice for bottles and tumblers. Pressure washers at close range will also lift edges.
Yes. Because these are printed after you order, small quantities are the norm rather than an exception. Single stickers and short runs cost more per unit than bulk orders, since setup is spread across fewer pieces. If you need hundreds or more, the Bulk and Wholesale Stickers collection has pricing built for volume.
Full color printing is standard, including gradients and photographic detail. Exact color matching has limits: digital presses print in CMYK, so colors defined in RGB or spot systems like Pantone shift slightly. If precise brand color matters, request a proof before the full run and note your target values in the order comments.
Production time depends on quantity and material, typically a few business days for small runs of standard materials before shipping. Add transit time based on your location and the shipping method you pick at checkout. Orders with proofs add a day or two while you review them. Check the listing or your order confirmation for the current turnaround estimate.
Your shopping cart is empty
Notifications
