By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A matching pair of Cast Vinyl truck logo decals made to order in your choice of 4, 8, 12 or 18 inch sizes. Designed for truck owners who want a clean, professional look on doors, tailgates or toolboxes.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This decal pair gives you two identical custom logo stickers, cut from Cast Vinyl and sized to your spec at 4, 8, 12 or 18 inches. That means one for each door, or one for the door and one for the tailgate, without guessing at alignment or ordering twice. The set is printed and cut to order, so the artwork you approve is the artwork that ships. Truck owners use these pairs for business identity, club rigs, farm trucks and personal builds where a single sticker would look unfinished. Because both decals come from the same production run, the color and cut match exactly, which matters most on symmetrical placements like driver and passenger doors.
Every pair is available in four finishes, and the right one depends on where the decals will live. Matte is the low-sheen choice that reads like paint on a work truck and hides glare in direct sun. Gloss adds depth and shine that pops against flat paint or a clean tailgate. Static cling applies without adhesive, so you can reposition or remove it whenever the truck changes roles, ideal for leased vehicles or seasonal branding. Clear finish keeps the focus on the artwork itself and works well over existing graphics or tinted surfaces. All four options use the same printing process, so color accuracy stays consistent across the pair.
Choosing between 4, 8, 12 and 18 inches comes down to viewing distance and door real estate. A 4 inch pair works for cab corners, mirrors or toolboxes where the logo needs to be noticed up close. The 8 inch size is a comfortable middle ground for standard door placement on most pickups. At 12 inches, the logo becomes readable from across a parking lot, which suits business trucks that double as rolling advertising. The 18 inch pair is built for big doors, flatbeds and semis where smaller graphics simply disappear. Measure the flat area you plan to use before ordering, and remember to leave margin around handles and body lines for a clean install.
Application works best on a clean, dry surface above roughly 60 degrees Fahrenheit. Wash the area with dish soap and water, dry it fully, then finish with isopropyl alcohol to remove any wax or residue. Peel the backing, position one edge first, and smooth the decal down with a squeegee or credit card, working outward to push air toward the edges. For static cling, a light mist of water lets you slide the decal into position before squeegeeing out the excess. After installation, avoid pressure washing directly at the edges and skip automated brush washes for the first few days. With reasonable care, the pair will keep looking sharp through regular highway use.
You receive a pair of two identical decals in the size and finish you select. Both are produced in the same run so the color and cut match exactly.
Matte is the most popular choice for work trucks because it reads like paint and resists glare. Static cling is a good pick if you need to remove or reposition the logo later, such as on a leased vehicle.
The decals are not vehicle-specific, so they fit any truck with enough flat surface area. Measure the spot you plan to use and compare it against the 4, 8, 12 or 18 inch size options before ordering.
4 inch, 8 inch, 12 inch, 18 inch
Your shopping cart is empty
Notifications
