Diamond Plate 4x4 Truck Bedside Decal Set

Diamond Plate 4x4 Truck Bedside Decal Set, 12-48 Inch

A two-piece diamond plate pattern 4x4 bedside decal set for trucks, SUVs and Jeeps. Cut-to-order in your choice of width from 12 to 48 inches, printed on durable cast vinyl.

Free shippingUSA: 5-7 days. International: 10-12 days.

Four finishesMatte, gloss, static cling or clear vinyl.

Made to orderNo returns for change of mind. Damaged orders are refunded or replaced.

Custom artworkUpload a sketch, logo or photo before adding to cart.

Size

Clear

Have your own design? Optional

Upload a logo, sketch or photo

JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.

Description

A two-piece diamond plate pattern 4x4 bedside decal set for trucks, SUVs and Jeeps. Cut-to-order in your choice of width from 12 to 48 inches, printed on durable cast vinyl.

Diamond Plate Look for Your 4x4 Truck Bedside

Give your rig the classic garage-and-gearhead look with this two-piece diamond plate style 4x4 truck bedside decal set. The raised-tread pattern reads like industrial checker plate from a distance, giving doors and bed panels a rugged, trail-ready personality without the cost or permanence of real tread plate. Each set includes one decal per side, mirrored so the pattern runs the same direction on both bedside panels. Choose your width from 12 up to 48 inches to fit everything from a compact pickup bedside to a full-size long bed. It is a straightforward way to add offroad character to a work truck, weekend wheeler, or show build, and it installs with basic tools in a single afternoon.

Finish Options: Matte, Gloss, Clear and Static Cling

Every set is printed to order in your choice of four finishes. Matte gives the pattern a painted-on, low-sheen look that blends into flat or matte paint. Gloss adds depth and makes the diamond plate pattern pop against flat paint colors. Clear vinyl lets the diamond plate print sit over your factory paint color so the tread pattern shows through with your truck's own tone behind it. Static cling is a non-adhesive option that holds to smooth glass and glossy panels without adhesive, ideal if you want the look temporarily or plan to remove it often. All four options use our standard cast vinyl or calendered vinyl construction depending on the finish selected.

Sizing and Fitment for Your Build

Because trucks vary widely, this set is offered by width rather than by a single fixed size. Select 12, 18, 24, 30, 36, 42, or 48 inches to match the panel space you are working with. Measure the flat area of your bedside or door panel before ordering, and keep in mind body lines, door handles, fuel doors, and trim pieces when planning placement. The decal can be trimmed during installation with a sharp knife for a custom edge around obstacles. This is a universal aftermarket decal set, not an OEM part, and it is not affiliated with any vehicle manufacturer. It fits any smooth, clean, painted or glass surface, so it also works on toolboxes, trailers, and garage doors.

Installation and Care

Apply to a clean, dry surface above 60 degrees Fahrenheit for best results. Wash the panel, remove wax and residue with isopropyl alcohol, and let it dry fully. Peel the backing, position the decal, and squeegee from the center outward to push out air, then remove the transfer tape slowly at a low angle. Small air bubbles can be worked out with a squeegee edge or popped with a pin. Wait about 48 hours before washing the truck. For ongoing care, hand wash gently and avoid high-pressure spray directly on the edges. Static cling versions simply press onto smooth glass and peel off whenever you like, no tools required.

What you get

Two-piece set, one decal per bedside, mirrored pattern
Available in 12, 18, 24, 30, 36, 42, and 48 inch widths
Choose matte, gloss, clear, or static cling finish
Printed on cast vinyl or calendered vinyl depending on finish
Universal fit for trucks, SUVs, Jeeps, toolboxes, and trailers
Trim-to-fit during installation for custom edges
Made to order in the USA by LEO Sticker

Specifications

Material	Cast vinyl (matte, gloss, clear) or calendered vinyl (static cling)
Finish	Matte, gloss, clear, or static cling
Application	Exterior smooth painted or glass surfaces; dry application above 60°F recommended
Set contents	2 mirrored diamond plate style 4x4 bedside decals with transfer tape, one per side

Frequently asked questions

What width should I order for my truck?

Measure the flat area of your bedside panel where you want the decal, avoiding handles, body lines, and fuel doors. Pick the width that fits within that measurement. You can also trim the decal during installation for a more exact fit.

Will this damage my paint when removed?

Applied to factory paint in good condition, the decal should remove cleanly when warmed gently with a hair dryer and peeled at a low angle. Original or compromised paint may lift, so test in a small hidden spot first.

What is the difference between clear and static cling?

Clear vinyl is a printed adhesive decal that shows your paint color through the open areas of the diamond plate pattern and stays put until you remove it. Static cling has no adhesive and only works on very smooth surfaces like glass, making it easy to reposition or take off anytime.