Falcon Wing Door Stripe Decals for Model X | LEO Sticker

Description

Matte or gloss vinyl stripe decals sized to complement the falcon wing doors on a Tesla Model X. A subtle accent for owners who want a custom touch without permanent changes.

A Clean Stripe Accent for Falcon Wing Doors

The upward-opening rear doors on the Model X create a long, uninterrupted panel that practically invites a stripe accent. This decal set was drawn with that panel in mind, so each stripe follows the door line and lands in proportion to the bodywork rather than looking like a generic cut. Choose 4, 8, 12 or 18 inch sizes depending on whether you want a small tick of contrast near the handle or a longer sweep along the door edge. The design stays clean and geometric, so it reads as a deliberate styling choice. Not affiliated with or endorsed by the manufacturer.

Matte, Gloss, Clear and Static Cling Options

Every set is printed on cast or calendered vinyl in your choice of finish. Matte stripes sit low on the paint and work well on darker colors where you want the line without shine. Gloss matches a factory paint finish more closely. Clear vinyl carries the printed stripe on a transparent carrier, and static cling applies with no adhesive at all, which makes it the easiest option to reposition or remove on a whim. Whichever finish you pick, application is a dry process with transfer tape on the adhesive versions, and the material conforms to the gentle curves of the door panel without heat guns or special tools.

Sizing the Stripes to Your Model X

The four size options cover the most common placements. The 4 inch stripes work as small accents near the door handles or mirror line. The 8 inch size fits along the upper door edge where the falcon wing seam begins. The 12 inch stripes suit the mid-door area, and the 18 inch option makes a full sweep that follows the door from front edge toward the rear. Measure the panel area you have in mind before ordering, since the falcon wing doors have a taller surface than a conventional door and proportions shift accordingly. Each set includes pieces for both doors.

Why Model X Owners Choose Our Tesla Decals

We print and cut every set in our US after you order, so nothing sits in a warehouse losing tack. Our tesla decals collection covers a range of Model X accents, and this stripe set is one of the simplest to apply: clean the panel, peel the backing, and squeegee it down with a card. Removal is just as straightforward, peeling away warm without leaving adhesive residue behind. That makes it a good option for leased vehicles or anyone who wants to return the car to stock condition later. Questions about placement or finish? Message us before ordering and we will help you pick.

What you get

• Stripe set drawn to follow the falcon wing door line on the Tesla Model X
• Available in 4, 8, 12 or 18 inch decal sizes
• Choose matte, gloss, clear or static cling finish
• Printed on cast or calendered vinyl, cut to order in our US
• Dry application with transfer tape, no heat gun needed
• Peels off cleanly without adhesive residue
• Includes matching pieces for both rear doors

Specifications

Frequently asked questions

Will these stripes interfere with the falcon wing doors opening?

No. The decals are thin vinyl applied flat to the door panel, so they do not add thickness that would affect the door movement. Just make sure the edges are pressed down firmly along the door seam.

Which size should I choose?

It depends on placement. The 4 and 8 inch sizes work as accents near the handle or upper door edge, while 12 and 18 inch stripes suit longer sweeps along the door. Measure your intended area first, since the falcon wing doors are taller than conventional doors.

Can I remove the decals later?

Yes. Warm the decal slightly with a hair dryer and peel it away slowly. Adhesive versions come off without residue, and static cling can be removed and reapplied at any time.