F-350 Rocker Panel Stripe Decal Set | Vinyl Decal Set

Description

Matte, gloss, clear and static cling rocker panel stripe decals for truck owners who want a clean side profile upgrade. Available in 4, 8, 12 or 18 inch decal sizes.

Rocker Panel Stripes That Frame Your F-350's Lower Body

A rocker panel stripe set is one of the simplest ways to change the look of a heavy duty pickup without touching paint or paying a body. These decals run along the lower body line, adding a horizontal accent that visually lowers the truck and ties the doors, cab and bed together. Each set is cut to order in Cast Vinyl or calendered vinyl, depending on the finish you choose, and arrives ready to apply with transfer tape in place. Whether you drive your truck to the job site every day or keep it clean for weekend shows, a rocker stripe gives the side profile a finished, deliberate look that plain panels just do not have. Choose the decal size that matches the stance you want, from a subtle 4 inch accent to a bold 18 inch band.

Four Finishes and Four Decal Sizes to Match Your Build

Every rocker panel stripe set is printed in-house in your choice of matte, gloss, clear or static cling vinyl. Matte gives a low-key, modern look that works well on darker paint and lowered builds. Gloss reads like painted-on striping and catches light along the body line. Clear vinyl lets your factory paint color show through the stripe for a tone-on-tone effect. Static cling is the pick if you want the look temporarily, since it applies without adhesive and peels off when you are done. Sizes run 4, 8, 12 or 18 inches tall, so you can go with a thin pinstripe-style accent or a wide racing-style band. Pair this set with other pieces from our Ford Bronco decal kit collection page if you are planning a full graphics theme.

How to Apply Your Rocker Panel Decal Set

Application works best on a clean, dry surface above about 60 degrees Fahrenheit. Wash the rocker area, remove any wax or residue with isopropyl alcohol, and let the panel dry completely. Position each stripe with a light tack first, using the body line as your guide so both sides sit at the same height. Once you are happy with placement, press from the center outward with a squeegee or soft card to lock it down, then pull the transfer tape back at a low angle. Small air pockets can be worked toward the edge or punctured with a pin and flattened. Take your time on alignment, since the long horizontal run is what makes the finished job look professional. Static cling pieces simply press into place with no tools.

Caring for Stripes After Installation

Vinyl rocker stripes hold up well to normal washing when treated with basic care. Hand washing is the safest method, and a mild car shampoo is all you need. If you use an automatic wash, skip high-pressure sprays aimed directly at the stripe edges, and avoid brush-style washes that can lift corners. Do not wax over the decals, and keep harsh solvents or degreasers away from the vinyl. After winter driving, rinse road salt off promptly to help keep edges sealed. If a corner ever lifts, warm it gently with a hair dryer on low and press it back down. Should you ever want to remove the set, warm the vinyl and peel slowly, then clean off any adhesive residue with a citrus-based cleaner.

What you get

• Rocker panel stripe decal set designed for the lower body line of full-size heavy duty pickups
• Available in 4, 8, 12 or 18 inch decal sizes
• Four finish options: matte, gloss, clear and static cling vinyl
• Printed in-house on cast or calendered vinyl with transfer tape applied
• Static cling option applies without adhesive and removes clean
• Sold as a matched left and right side set
• Priced within the $39.99 to $59.99 range typical for this category

Specifications

Frequently asked questions

What decal size should I choose for my truck?

A 4 or 8 inch stripe gives a subtle accent along the rocker, while 12 and 18 inch sizes create a wider, more aggressive band. Measure the flat area on your rocker panel before ordering to confirm which height fits your body line.

Will these stripes damage my paint?

Applied to factory paint in good condition, the adhesive vinyl removes without damage when warmed and peeled slowly. Static cling uses no adhesive at all, so it is the safest option if you are concerned about paint.

Can I install this set myself?

Yes. The set comes with transfer tape and applies with basic tools like a squeegee or soft card. The key is cleaning the surface thoroughly and aligning both sides to the same height along the body line before pressing the vinyl down.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.