Model X Matte Black Hood Decal | Vinyl Decal Sticker

Description

A matte black hood decal cut from Cast Vinyl, sized for Model X owners who want a blackout accent without wrapping the whole panel. Available in 4, 8, 12 or 18 inch sizes.

Matte Black Hood Decal for Model X Owners

This hood decal gives your Model X a clean blackout accent in a single afternoon. Cut from matte Cast Vinyl, it lays down with a low-sheen finish that reads as painted rather than stickered, so it blends with factory body panels instead of fighting them. The decal arrives pre-cut and ready to apply with a simple peel-and-stick process using the included squeegee card. Choose 4 inches for a subtle Graphic-style accent, 8 or 12 inches for a center hood stripe, or 18 inches when you want the Graphic to carry more of the panel. It is a low-commitment alternative to a full wrap, and it removes cleanly when you are ready for a change.

Why Matte Cast Vinyl Works on a Hood

A hood takes more sun, heat and road spray than almost any other panel, so material choice matters. We print on Cast Vinyl, which is thinner and more conformable than calendered film, letting it follow gentle panel curves without lifting at the edges. The matte surface diffuses light instead of reflecting it, which hides minor dust and water spots far better than a gloss finish. The adhesive is pressure-activated, so you can reposition the decal during application before you burnish it down. Applied to a clean, wax-free hood, it holds flat through daily driving, car washes and weather. No printing, cutting or trimming is needed on your end, everything arrives ready to place.

Choosing Between 4, 8, 12 and 18 Inch Sizes

Size is the biggest decision with this decal, and each option suits a different look. The 4 inch version works as a small accent near the hood edge or paired with other graphics. The 8 inch size sits nicely as a centered stripe on most hoods without overwhelming the panel. The 12 inch option fills more visual space and reads as a deliberate design element rather than an accent. The 18 inch decal makes the boldest statement and works best on hoods with a wide, flat center section. Measure the area you want to cover before ordering, and remember the listed size refers to the decal's longest dimension. When in doubt, many customers start smaller and reorder.

Application Tips and Care

Start with a hood that is cool to the touch, out of direct sunlight. Wash the area, remove any wax or sealant with isopropyl alcohol, and let it dry fully. Peel the backing, position the decal using light pressure, and smooth it from the center outward with the squeegee card to push air toward the edges. If you trap a bubble, a tiny pinprick lets you flatten it without lifting the Graphic. Avoid high-pressure spray directly on the edges for the first day or two. For ongoing care, hand washing is gentlest, though the decal handles touchless washes fine. To remove it later, warm it gently with a hair dryer and peel slowly.

What you get

• Matte black Cast Vinyl with a low-sheen, painted look
• Available in 4, 8, 12 or 18 inch decal sizes
• Pressure-activated adhesive allows repositioning during application
• Pre-cut and ready to apply, no trimming required
• Conforms to gentle hood curves without lifting at the edges
• Removes cleanly with gentle heat when you want a change
• Includes application instructions and a squeegee card

Specifications

Frequently asked questions

Will this decal damage my paint when I remove it?

No, when removed correctly. Warm the decal gently with a hair dryer and peel it back slowly at a low angle. On well-maintained factory paint this leaves no residue; any small traces come off with isopropyl alcohol.

Which size should I choose for a centered hood stripe?

The 8 or 12 inch size works well for most hoods as a centered accent. Measure the flat area of your hood first, since the listed size is the decal's longest dimension, and pick the one that fits within that space.

Can I apply this in cold weather?

It is best applied above about 60°F on a hood that is cool and dry. Cold vinyl is less flexible and adheres more slowly, so if temperatures are low, apply in a garage and let the vehicle sit inside afterward.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.