Off-Road Decal Set for Jeep Wrangler Doors | LEO Sticker

Description

A die-cut Off-Road off-road decal set sized for Jeep Wrangler doors and body panels. Choose a width from 12 to 48 inches to match your build.

Off-Road Off-Road Decal Set for Jeep Wrangler Builds

This Off-Road off-road decal set is cut for Jeep Wrangler owners who want the trail look without the trail dust. Each word and badge element is individually die-cut from cast vinyl, so there is no background film to trim or hide once the sticker is applied. The set is sold in matched widths from 12 inches up to 48 inches, letting you scale the lettering to suit a two-door, a four-door, or a spare tire carrier. Whether you run a daily driver or a dedicated rig, this jeep decal set gives your doors and panels a clean, factory-inspired trail theme applied on your own terms. Not affiliated with or endorsed by the manufacturer.

Matte, Gloss, Clear and Static Cling Options

Every set is printed to order in your choice of finish. Matte is the low-sheen favorite for a trail-worn, understated look that photographs well in direct sun. Gloss gives the lettering a bright, freshly-detailed finish that stands out against flat paint. Clear vinyl works when you want the design to sit subtly over body color, and static cling lets you apply the decals without adhesive, so you can reposition or remove them for car shows, events, or a change of style. Because each finish behaves a little differently on textured or curved surfaces, the listing for each option notes the recommended application temperature and surface type before you order.

Sizing the Set for Two-Door and Four-Door Wranglers

The set is sold by overall width, measured at the widest point of the die-cut design before application. A 12-inch width suits tool boxes, coolers, and rear quarter panels. Mid-range widths between 18 and 30 inches are the most common choice for door panels on both two-door and four-door models. The larger 36 and 48 inch widths are cut for full door spans, hoods, or trailer setups. Measure the flat area you plan to cover before ordering, and allow a small margin on each side so the lettering does not wrap over body lines. If you are applying to a curved panel, a wider set can be gently stretched during installation.

Applying Your Jeep Decal Set

Application is a dry process you can complete in a garage or driveway. Clean the panel with isopropyl alcohol and let it dry fully. Peel the backing paper, position the set using the premask application tape, and press from the center outward with a squeegee or soft card to push out air. Work slowly on larger widths and use a second pair of hands for the 36 and 48 inch sets. Once the premask is removed, go over the lettering again to seat the edges. Avoid washing the vehicle for the first 24 hours so the adhesive can bond. Static cling versions simply press on and lift off whenever you like.

What you get

• Die-cut cast vinyl set with no background film to trim
• Sold by width in 12, 18, 24, 30, 36 and 48 inch options
• Choose matte, gloss, clear or static cling finish
• Sized for Jeep Wrangler doors, quarter panels and hoods
• Premask application tape included for easier placement
• Printed to order in our US shop
• Static cling option removes without adhesive residue

Specifications

Frequently asked questions

Will this decal set fit my Jeep Wrangler?

The set is sized for Jeep Wrangler doors and body panels, with widths from 12 to 48 inches to fit two-door and four-door models. Measure the flat area you want to cover and choose the closest width. Not affiliated with or endorsed by the manufacturer.

What is the difference between the matte and gloss finishes?

Matte has a low-sheen, understated trail look, while gloss has a bright, shiny finish that pops against flat paint. Both are cast vinyl and applied the same way. Clear and static cling options are also available if you prefer a subtle look or removable application.

Can I remove the decals later?

Yes. Peel the vinyl away slowly from one corner, warming it gently with a hair dryer if needed, and clean any residue with isopropyl alcohol. The static cling option peels off cleanly with no adhesive at all.