Jeep & Off-Road Decals

This collection is built for Jeep owners, overlanders and trail weekenders who want their rig to say something before the tires ever leave the pavement. Whether you run a daily-driven Wrangler, a lifted 4x4 truck or a trail toy that earns its scars, these jeep decals cover doors, hoods and windows with designs made for people who actually go off road. Every order is printed to order in the USA and ships free.

What's in the Jeep and Off-Road Decal Collection

The lineup covers the surfaces Jeep and off-road owners ask about most. The Off-Road Decal Set for Jeep Wrangler Doors is a coordinated set sized for door panels, so both sides of the rig match without guesswork. The Jeep Decal Set for Wrangler Doors and Off-Road Rigs 4x4 takes the same idea further, pairing door graphics with accents that work on 4x4 trucks and SUVs, not just Wranglers.

For window placement, the It's a Jeep Thing Vinyl Window Decal Set speaks the language every wave-back driver already knows. If you want the trail to follow you home, the Mud Tire Track Decal for Jeep Body Panel lays a tire tread graphic across a door, hood or quarter panel, and it pairs naturally with our wider range of Body Panel Decals for larger statement pieces. The 4x4 Off-Road Mountain Decal for Jeep Trucks and SUVs is a clean badge-style graphic for tailgates, hoods and toolboxes. And for the community side of the hobby, the Jeep Ducking Duck Decal Set of 10 Vinyl Stickers gives you a flock to dash, share and trade at meetups.

Materials are chosen per product from our stocked options: matte vinyl for a low-sheen, trail-worn look, gloss vinyl for a bold finish that pops against flat paint, clear vinyl for graphics that read like they were printed right on the surface, and static cling for window decals you can reposition or remove without adhesive. If you are browsing beyond this collection, our full Decals Stickers catalog covers the rest of the vehicle.

Not affiliated with or endorsed by the manufacturer.

How to Pick the Right Size for the Surface

Sizes in this collection run from 12 to 48 inches, and the right choice depends on where the decal lands and how much uninterrupted space that surface has. Measure the flat, open area of the panel, not the full panel itself, and leave at least an inch of breathing room on every side so the graphic does not crowd body lines, door handles, hinges or trim.

For Wrangler doors, a 12 to 18 inch decal sits comfortably in the lower panel area below the handle line. Hoods have more room, and a 24 to 36 inch graphic centered or offset toward one side fills the space without wrapping over the hood scoop or vents. Windows and rear glass usually call for 12 to 24 inches depending on tint and how much visibility you want to keep. Full-width statements across a tailgate or a long body panel are where 36 to 48 inch decals earn their keep.

A quick tip: cut a paper template to the listed size and tape it in place before ordering. Standing back ten feet tells you more about proportion than any tape measure will. If you are between two sizes, the smaller one almost always looks more intentional on a curved or interrupted surface.

How to Fit a Large Decal

Surface prep. Wash the panel with car wash soap and rinse thoroughly, then go over the exact application area with isopropyl alcohol on a lint-free cloth to remove wax, silicone and fingerprints. The panel must be completely dry. Work in shade, not direct sun, and skip cold days; a moderate temperature helps the vinyl conform and stick evenly.

Positioning. Use masking tape to tack the decal in place with a hinge strip along the top edge. Step back, check level against body lines, and adjust until it sits square. Once you are happy, tape it fully so it cannot shift during application.

Squeegee technique. Peel the backing away from the transfer tape, working from the hinged edge, and press the decal down with firm, overlapping strokes from the center outward using a felt-edge squeegee or a plastic card wrapped in a soft cloth. Work top to bottom in sections rather than letting the whole graphic contact at once. For curved areas like door creases or fender arches, apply gentle heat from a hair dryer and stretch the vinyl slowly as you go.

Air bubbles. Small bubbles are normal on a first pass. Wait a few minutes, then pierce the largest ones with a pin and press the air out toward the hole with the squeegee. Never slash large bubbles with a blade, as cuts can open up over time. If a bubble refuses to move, a little warmth softens the vinyl so it flattens with pressure.

Final step. Peel the transfer tape slowly back on itself at a sharp angle, not straight up, so the decal stays on the panel. If any edge lifts, press it back down and hold it a moment before continuing.

Care and Removal

Day to day, treat a decal like the paint around it. Hand wash with mild soap and a soft mitt, and avoid pressure washing at close range or high-angle sprays directly at the edges, since lifted edges are the most common way a decal fails early. Automatic brush washes can catch a loose edge, so touch up any lifting corners promptly with firm finger pressure.

Wax around the decal rather than over it, or use a wipe-on product that will not build up along the graphic's edge. When you want the decal gone, warm it with a hair dryer and peel it back slowly at a shallow angle. Any adhesive residue left behind comes off with isopropyl alcohol and a microfiber cloth. Static cling window decals are the easiest of all: peel, reposition, and reuse on another window whenever you like.

Are these decals made for Jeep models only?

The door sets are sized with Wrangler door panels in mind, but most graphics in this collection, including the 4x4 mountain decal and the tire track decal, work on any truck or SUV with a flat-enough surface. Measure your panel and compare it to the listed decal size to confirm fit.

Which material should I choose for a window decal?

Gloss vinyl gives the boldest look on glass, clear vinyl blends in so the graphic appears printed on the window, and static cling lets you remove and reposition the decal without adhesive. Static cling is a good pick if you share the vehicle or want a seasonal look.

Can I apply these decals myself or should a shop do it?

Most customers apply these at home with masking tape, a squeegee and patience. Prep the surface with alcohol, hinge the decal in place, and work from the center outward, piercing any air bubbles with a pin. Larger 36 and 48 inch graphics are easier with a second pair of hands.