Custom Decals & Stickers

This collection is for anyone who wants their own artwork turned into a finished decal: small business owners branding bottles and windows, teams marking helmets, and people who want a monogram or logo on a laptop, tumbler or car. Every order is printed and cut to order in the USA from your file, with free shipping.

What the Custom Decals & Stickers Collection Includes

Each product in this collection is a transfer sticker, which means your design is individually cut from vinyl and carried on a transfer sheet so the pieces stay in position when you apply them. You supply the artwork and we print and cut it, so the shape follows your design rather than sitting inside a rectangle.

The collection covers the most common surfaces people ask for. Custom Transfer Stickers for Water Bottles are sized for bottles and tumblers. Custom Transfer Stickers for Cars turn a logo or personal design into a vehicle decal. Custom Vinyl Transfer Stickers for Laptops come in matte or gloss vinyl so you can match the finish of your device. Custom Transfer Stickers for Storefront Windows work as a decal set for glass, letting you repeat a logo or hours and messaging across a window. Personalized Team Name Transfer Stickers for Helmets put a team name or number on helmet shells. Custom Monogram Transfer Stickers for Tumblers & Cups are cut for curved drinkware.

Materials stocked across the shop are matte vinyl, gloss vinyl, static cling and clear vinyl. Matte vinyl gives a soft, non-shiny look that suits minimal logos and monograms. Gloss vinyl has a bright finish that makes colors pop. Static cling goes on glass without adhesive and peels off cleanly, which is handy for seasonal window graphics. Clear vinyl lets parts of your design sit on a transparent base. If you want a sheet of die cut stickers on a backing rather than a transfer decal, see Custom Logo Stickers for logo printing by the sheet.

How to Pick the Right Size for the Surface

Sizes in this collection run from 12 to 48 inches, quoted by the longest dimension of the finished decal. Measuring the surface before you order saves a lot of guesswork, so use a tape measure rather than estimating by eye.

For water bottles and tumblers, measure the flat or gently curved area between ridges, since a decal wider than that space will wrap into the curve and can lift at the edges. For laptops, measure the lid area you want to cover and leave a margin at the edges so the decal does not catch when the machine goes into a sleeve. For car doors or rear windows, a 12 inch decal reads well at a distance, while larger designs in the 24 to 48 inch range suit tailgates, vans and trailers. For storefront windows, measure the glass pane and think about where the decal sits relative to the frame and any hardware. For helmets, keep the decal small enough to follow the curve of the shell without bridging across it.

One practical rule: the more curved the surface, the smaller the decal should be relative to that curve. A 12 inch decal lies flat on a window but will fight you on a narrow bottle. If you are ordering a set, such as a storefront decal set, measure one placement and repeat it rather than guessing each pane. For more background on cut vinyl in general, read Vinyl Decals Stickers.

How to Fit a Large Decal

Applying a large decal is straightforward if you work in order: prep the surface, position the decal, squeegee it down, then remove the carrier.

Surface prep. Clean the surface with isopropyl alcohol or a dedicated surface cleaner and a lint-free cloth. On cars, do this after washing so there is no wax or polish film left. On glass, go over the corners and edges of the pane where dust collects. Let the surface dry completely before moving on. Temperature matters too: apply indoors or on a mild day, since vinyl behaves best when the surface is not cold.

Positioning. Use masking tape to hold the decal in place and check it is level. For large decals, tape just the top edge as a hinge, lift the decal, and peel a few inches of the backing away. For very large pieces, tape a center line and work outward from the middle.

Squeegeeing. Work from the center outward with firm, overlapping strokes. A felt-edged squeegee or a plastic card wrapped in a soft cloth protects the vinyl. Go slowly on curves, letting the vinyl conform rather than stretching it.

Air bubbles. Small bubbles are normal. Press most of them out toward the edges with the squeegee. If a bubble will not move, pierce it with a pin at the edge of the bubble and press the air out with your thumb. Do not slice large bubbles with a blade, as a cut can open up over time. If the decal has lettering with enclosed counters, check those spots last, since air hides there.

Removing the carrier. Peel the transfer sheet back slowly at a sharp angle, parallel to the surface rather than up and away. If a piece of the design starts to lift, lay the carrier back down, squeegee that area again, and continue.

Care and Removal

Day to day, a soft cloth and mild soapy water are enough to clean around a decal. Avoid abrasive pads and strong solvents, and do not aim a pressure washer directly at the edge of a decal on a vehicle. On bottles and tumblers, hand washing is gentler than a dishwasher, and high heat is hard on any vinyl.

To remove a decal, warm it gently with a hair dryer on a low setting to soften the vinyl, then peel it back slowly at a shallow angle. If residue stays behind, roll it off with your thumb or a plastic scraper, then clean the spot with isopropyl alcohol. Static cling is the easiest of all, since it lifts off glass with no adhesive and can often be repositioned. Removal is always cleanest when the decal has not been baked on by long heat exposure, so plan removal for a mild day.

Can I send my own artwork for custom decals?

Yes, that is the whole point of this collection. Every product here is made to order from your own artwork, whether it is a logo, a team name, a monogram or a hand-drawn design. Send the cleanest file you have, ideally vector, and we print and cut it in matte vinyl, gloss vinyl, static cling or clear vinyl.

What is the difference between a transfer sticker and a regular sticker?

A regular sticker sits on a rectangular or die cut backing sheet and you peel it off one at a time. A transfer sticker is cut to the exact shape of your design and carried on a transfer sheet, so letters and separated pieces all go on in position together. That makes transfer stickers the usual choice for logos, lettering and multi-piece designs on cars, windows, laptops and helmets.

Do these decals work on curved surfaces like bottles and helmets?

Yes, with sizing in mind. Vinyl conforms to gentle curves, so tumblers, bottles and helmet shells all work. Keep the decal small relative to the curve so it does not bridge across it, apply from the center outward, and let the vinyl settle rather than stretching it. For very tight curves, order the smallest size that still reads clearly.