By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
Personalized team name transfer stickers printed on cast vinyl, made to fit helmets of all kinds. Choose your width from 12 to 48 inches and add your own team name.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
Whether you coach a youth league, run a rec team, or just want your squad's name front and center, these custom transfer stickers get it done. You send us the team name, pick a width from 12 to 48 inches, and we print it as a single-color transfer sticker ready to apply. The design is cut so the letters themselves transfer onto the helmet surface, leaving no background film behind. That clean, painted-on look works well on smooth helmet shells where a full rectangular decal would look out of place. Order one for yourself or several for the whole roster so everyone matches on game day.
Each order is cut from cast vinyl, a thin and conformable material that follows the gentle curves of a helmet shell without lifting at the edges. You choose the finish: matte for a low-sheen look that reads well under stadium lights, or gloss for a brighter, bolder appearance. Clear and static cling options are also available if you want a removable or surface-printed style instead. We cut your team name with precision equipment, weed away the excess vinyl by hand, and apply transfer tape so the whole word lifts off the backing in one piece. Every set is made to order with your exact text, so double-check your spelling before checkout.
Start with a clean, dry helmet. Wipe the area with isopropyl alcohol and let it fully evaporate. Peel the backing paper away, position the transfer tape and letters over the spot you want, and press from the center outward with a squeegee or the edge of a card. Work slowly to push out any air trapped under the letters. Once the whole name is pressed down, peel the transfer tape back at a sharp angle, leaving the vinyl letters bonded to the helmet. Smaller widths suit the sides of a helmet, while larger sizes work on the back or across the front. Wait a full day before exposing the helmet to rain or heavy handling.
These are sold as sets with width options from 12 to 48 inches, so you can scale the name to fit everything from a small batting helmet to a full-size football or lacrosse helmet. Measure the flat or gently curved area where you plan to apply the name before ordering, and compare it to the listed width. If you are outfitting a whole team, order the same width for every helmet so the lettering height stays consistent across the roster. Prices in this category typically run from about $11.99 to $36.99 depending on size. Have a longer team name? Wider sets give the letters more room, which keeps them readable from the stands.
They apply best to smooth, clean helmet shells such as sports helmets and hard hats. Textured or heavily padded surfaces may not hold the vinyl well. Clean the area with isopropyl alcohol and let it dry completely before applying.
Measure the area of the helmet where you want the name, then choose a width that fits within that space. Shorter names can use narrower widths, while longer names stay more readable at wider sizes. Order the same width for every helmet if you want a consistent look across a team.
No. These are transfer stickers, so only the cut letters of your team name adhere to the helmet. The carrier tape is removed after application, leaving a clean, painted-on appearance.
12", 18", 24", 36", 48"
Your shopping cart is empty
Notifications
