Ram & Dodge Decals

You bought the truck because it works as hard as you do, and a Ram or Dodge decal is one of the simplest ways to make it yours. This collection covers cut vinyl graphics sized for Ram 1500, 2500 and 3500 body panels, tailgates, rear windows and toolboxes. Whether you want a small Ram head on a quarter window, a full-width tailgate stripe, or a Cummins badge replacement, the decals here are cut from outdoor-rated vinyl with adhesives formulated for automotive paint and glass. Most are die-cut with no background, so the graphic reads like paint once installed. Everything ships from the US, typically within a few business days.

Ram & Dodge Decals: What You Get

This collection includes Ram and Dodge truck decals in several categories: Ram head logos and wordmarks, Cummins and diesel-themed graphics, tailgate stripes and panel accents, window decals in smaller sizes, and patriotic designs that pair well with truck graphics. It fits owners of Ram 1500, 2500, 3500, and older Dodge Ram models, plus diesel enthusiasts running Cummins powerplants.

Sizes range from small 4 inch emblems for toolboxes and mirrors up to 24 inch and larger graphics for tailgates and bed sides. If you need multiples for a fleet or shop, the Bulk & Wholesale Stickers collection covers volume ordering, and custom lettering is available through Custom Stickers.

Vinyl Options for Ram & Dodge Decals

Two vinyl families appear across this collection, and the difference matters for where you install. Calendered vinyl is a 6 mil intermediate film with a permanent adhesive. It is the standard choice for flat surfaces: tailgates, toolbox lids, and flat body panels. It typically holds up 5 to 6 years outdoors.

Cast vinyl is thinner and conforms to curves. Use it for fenders, wheel arches, bumper contours, and any panel with body lines. It resists shrinking and cracking longer than calendered film.

Finish options include matte, gloss, clear and static cling. Matte cuts glare on tailgate decals, while gloss adds shine. Some larger graphics ship with an air-release liner, which lets you push trapped air out through micro channels instead of lifting and repositioning the whole decal.

Fit and Sizing for Ram & Dodge Decals

Getting the size right matters more than most buyers expect. These numbers reflect typical Ram body panels:

• 4 to 6 inches: quarter windows, mirrors, toolbox lids, and bumper corners.
• 8 to 12 inches: rear window placement or the lower tailgate below the latch handle.
• 14 to 18 inches: bed side panels between the wheel arch and taillight.
• 20 to 24 inches and up: full tailgate width. Measure your tailgate between the tail lights first, since Ram tailgate widths vary by cab and bed configuration.

For rear window graphics on a Ram 1500 crew cab, the sliding window assembly eats into usable glass, so measure the flat glass area rather than the full window. On the bed sides, keep graphics at least 1 inch away from body lines and door handles to avoid stretching the film over edges.

Installing and Caring for Ram & Dodge Decals

Install above 50 degrees Fahrenheit and out of direct sun. Cold vinyl stiffens and will not conform; hot vinyl tacks too aggressively.

• Step 1: Clean the surface with isopropyl alcohol and a lint-free cloth. Do not use wax or silicone cleaners, they block adhesion.
• Step 2: Position the decal with masking tape hinges at the top edge, then step back and check alignment from 15 feet away.
• Step 3: Peel the backing, working from the top. For larger decals, use the wet method with a slip solution of water and a drop of dish soap.
• Step 4: Squeegee from center outward. With air-release liners, push bubbles toward the nearest edge with firm, overlapping strokes.
• Step 5: Peel the application tape slowly at a 180 degree angle, pulling back on itself, not up and away.

After installation, wait 48 hours before washing. Hand wash with mild soap and a soft mitt. Avoid pressure washing directly at decal edges, and skip automated brush washes, which can lift corners over time.

How to Pick Ram & Dodge Decals

A quick decision list before you order:

• Flat surface or curved? Flat tailgate or toolbox: calendered vinyl. Curved fender or bumper: cast vinyl.
• How long will you keep the truck? Short-term lease, standard film is fine. Long-term ownership, cast vinyl holds up better against sun and shrinking.
• Night visibility? If the truck sits near roads or job sites, a gloss finish on the tailgate stands out under headlights.
• Paint color? Gloss finish reads well on most paints. Matte stands out on gloss paint and blends on matte wraps.
• Size doubt? Cut a paper template at the listed dimensions and tape it in place before ordering.

Related collections

• Car & Truck Decals
• American Flag Decals
• Boat & Marine Decals

Frequently asked questions

Will these decals damage my truck's paint when removed?

On factory paint in good condition, removal is generally clean. Warm the decal with a hair dryer or heat gun on low, then peel slowly at a shallow angle. Residual adhesive comes off with isopropyl alcohol or a dedicated adhesive remover. Freshly repainted surfaces should cure for at least 30 days before any decal is applied.

Do the decals have a background, or are they die-cut?

Most graphics in this collection are die-cut, meaning only the design itself is vinyl and there is no background film. Your paint or glass shows through the open areas. Full-coverage window graphics and some stripe kits are printed on clear or solid film, and the product listing states which method is used.

What size decal fits a Ram 1500 tailgate?

Most Ram 1500 tailgates have roughly 60 inches of usable width between the tail lights, but the latch handle and backup camera occupy the center. A decal placed below the handle typically works at 8 to 18 inches wide. Full-width designs need 20 inches or more. Always measure your specific truck, since widths vary by year and bed configuration.

Can I put a decal on my rear sliding window?

Yes, but measure carefully. The sliding portion and the defroster grid lines limit placement. Apply the decal to the fixed glass portion, keep it clear of the slider track, and avoid covering defroster lines if possible, since removal later can stress the grid connections.

How long should I wait after installation before washing my truck?

Wait 48 hours to let the adhesive fully bond. After that, hand washing with mild soap is fine. Avoid high-pressure spray aimed directly at the decal edges and skip brush-style automatic car washes. Touchless washes are the safer option for graphics long term.

Do you offer these Ram decals in bulk or custom sizes?

Volume ordering for fleets, shops, and events is handled through the Bulk & Wholesale Stickers collection. For different sizes, custom colors, or personalized text alongside a Ram graphic, use the Custom Stickers collection. Both ship from the US with standard processing times.