Tribal Bald Eagle Semi Truck Decals Checkered Flag

Description

A set of tribal bald eagle semi truck decals with a checkered flag design, cut from cast vinyl for long-haul rigs. Made for owner-operators who want bold graphics on their cab or sleeper.

Tribal Decals That Turn Heads at Every Truck Stop

This tribal bald eagle checkered flag set brings aggressive, flowing artwork to your rig. The eagle's wings sweep across a checkered flag background in a tribal style that reads clearly from a distance, whether you are rolling down the interstate or parked at a show. Each piece is cut to order in your choice of width from 12 to 48 inches, so you can size the pair for cab doors, sleeper panels, or a full trailer-length statement. The artwork is printed on cast vinyl, which conforms to the curves and rivets common on semi truck bodies. If you run a themed truck or you are building a show piece, this design gives you a strong focal point without needing a full wrap.

Finish Options for Every Look

Choose the finish that fits your build. Matte gives the artwork a low-profile, painted-on appearance that works well on darker cab colors and tonal graphics. Gloss adds depth and shine that pops against flat paint and stands out under lot lighting. Clear vinyl puts the emphasis entirely on the artwork itself, letting your paint color show through open areas of the design. Static cling offers a damage-free option for drivers who lease their equipment, want a seasonal look, or need to remove graphics before a trade-in. Every option is printed with printed inks so the eagle and checkered pattern hold their color through sun exposure on the road.

Installation on Cab Doors and Sleeper Panels

Application is a wet or dry process using the included instructions, and the cast vinyl conforms around gentle curves, panel seams, and rivet lines with a little heat from a hair dryer or heat gun. Clean the surface with isopropyl alcohol and let it dry fully before positioning the decal. The set ships as mirrored left and right pieces, so the eagle faces forward on both sides of the truck. Larger sizes are best installed with a second person to keep the graphic from folding onto itself. Take your time squeegeeing from the center outward to push out air and moisture for a smooth, professional-looking result.

Sizing Your Eagle Decal Set

Width options run from 12 inches up to 48 inches, measured across the widest point of each decal. A 12 to 18 inch pair suits cab doors, mirror arms, or the lower sleeper panel. Mid-range sizes around 24 to 30 inches fill a sleeper side or the space above your fuel tank fairings. The 36 and 48 inch options make a full graphic statement across a trailer side or wide sleeper. Before ordering, measure the flat area you plan to cover and leave a small margin around edges, hinges, and lights. Each set contains one left-facing and one right-facing decal, ready to mirror across your rig.

What you get

• Sold as a mirrored pair, one for each side of the truck
• Available in widths from 12 to 48 inches
• Cast vinyl that conforms to curves, seams, and rivet lines
• Choose matte, gloss, clear, or static cling finish
• printed inks printed in our US shop
• Wet or dry application with printed instructions included
• Static cling option removes cleanly for leased equipment

Specifications

Frequently asked questions

Will these decals work on a leased truck?

Yes. Choose the static cling finish, which applies without adhesive and peels off cleanly when your lease ends or you switch equipment.

How do I pick the right size?

Measure the flat area where you plan to install the decal and compare it to the listed width, which is the widest point of each piece. Leave a small margin around panel edges, hinges, and lights.

Can I install these over rivets and panel seams?

Yes. Cast vinyl conforms to gentle curves, seams, and rivet lines with modest heat from a hair dryer or heat gun while you work it down with a squeegee.