Ripper Wood Truck Graphics | Custom Car Decals

Description

Ripper Wood vinyl decal graphics that give cars and trucks a carved wood-look accent. Printed as a set in your choice of width, made for drivers who want custom car decals with a distinctive style.

Ripper Wood Truck Graphics Built to Order

This Ripper Wood design brings a carved timber look to your ride without the weight or upkeep of real wood. Each set of custom car decals is cut from cast vinyl and printed in our shop to order, so the pattern stays crisp along every curve of the graphic. Choose a width from 12 to 48 inches to match your hood, tailgate, doors, or tool box. The design works on pickup trucks, vans, trailers, and cars alike, and the set is laid out so you can position each piece where it fits your build best. Whether you want a subtle accent or a bold statement across the side of your truck, this graphic set scales with your plan.

Matte, Gloss, Static Cling and Clear Finish Options

Every Ripper Wood set is available in the finish that suits your project. Matte gives the graphic a painted-on, low-sheen look that blends into factory paint. Gloss adds depth and makes the wood grain pop in sunlight. Static cling offers a removable option for show days, seasonal use, or anyone who changes their look often, since it holds without adhesive. Clear finish works well on glass or over light paint where you want the surface to show through the design. All four options use the same artwork, so the choice comes down to how and where you plan to apply the set.

Applying Your Wood Grain Decal Set

Start with a clean, dry, wax-free surface and work in moderate temperatures away from direct sun. Peel the carrier film slowly, align the first piece, and smooth it from the center outward with a squeegee or soft card to push out air. Larger widths are easier with a second set of hands, especially on hoods and tailgates. For adhesive finishes, avoid washing the vehicle for the first day or two so the bond sets fully. Static cling pieces press on and can be repositioned or peeled off without residue, which makes them a good pick for windshields, side glass, and temporary displays.

Why Order Custom Car Decals From Our Shop

Each set is printed and cut in the USA after you order, so nothing sits in a warehouse losing quality. We offer widths from 12 to 48 inches, letting you size the graphic to everything from a compact car door to a full-size truck bed panel. Because these are custom car decals made to your specs, returns are limited to defects in printing or cutting, so measure your application area before ordering. If you have questions about sizing, finish choice, or placement, reach out before you buy and we will help you pick the right width for your project.

What you get

• Ripper Wood carved wood-grain design sold as a complete decal set
• Available in 12", 18", 24", 36" and 48" widths
• Choose matte, gloss, static cling or clear cast vinyl finish
• Printed and cut to order in our US shop
• Suitable for cars, trucks, vans, trailers and tool boxes
• Static cling option removes cleanly without adhesive residue
• Application instructions included with every set

Specifications

Frequently asked questions

How do I choose the right width for my truck?

Measure the area where you plan to place the graphic at its widest point, then pick the closest width that fits within that space. A 12-inch set suits doors and pillars, while 36- and 48-inch sets work better on hoods, tailgates, and bed panels.

Can I remove the decals later?

Yes. Adhesive finishes peel away when warmed gently with a hair dryer on low, and any remaining adhesive can be cleaned with standard automotive detailer. Static cling pieces simply peel off by hand with no residue.

Will these work on textured surfaces like tool boxes?

The set applies best to smooth, flat, or gently curved surfaces. Deeply textured or heavily contoured areas may not allow the vinyl to conform fully, so we recommend smooth panels for the cleanest result.