Safari Snorkel Vinyl Decal Set for Jeep Wrangler Doors

Description

A safari snorkel body decal set for Jeep Wrangler owners who want the rugged raised-intake look without cutting sheet metal. Printed on durable vinyl in your choice of finish.

The Snorkel Look, Without the Hardware

A real raised air intake involves drilling, trimming, and a permanent change to your Jeep Wrangler. This safari snorkel vinyl sticker set gives you the same trail-ready silhouette in minutes. The decal follows the familiar line up the fender and along the A-pillar, reading as a snorkel from across the parking lot or on the trail. It is a fun, reversible way to complete a rugged build, and it pairs well with other jeep wrangler decals in our shop. Choose a width between 12 and 48 inches to match your fender height, apply it dry, and peel it off whenever you are ready for the real thing or a new look. Not affiliated with or endorsed by the manufacturer.

Choose Your Finish and Width

Every set is printed to order in your choice of matte, gloss, clear, or static cling vinyl. Matte blends into flat paint and textured panels for a factory-installed appearance. Gloss adds a clean, eye-catching shine that stands out at car meets. Clear vinyl lets your paint color show through the design, and static cling lets you reposition or remove the piece without adhesive, which is handy for photos, events, or lease vehicles. Widths run from 12 inches for a subtle accent up to 48 inches for a full-scale snorkel line. Pick the option that matches your build before adding to cart, and we will cut and print your set the same way we proof it.

How to Apply It to Your Wrangler

Start with a clean, dry surface at moderate room temperature. Position the snorkel line along the fender edge with the transfer tape still in place, and use painter's tape to hold it while you step back and check alignment. Once you are happy with the placement, peel the backing, apply from the bottom of the design upward, and squeegee out air as you go. The cast vinyl conforms to gentle body curves and door panel contours. Finish by removing the transfer tape at a low angle. Full step-by-step instructions ship with every order, and a heat gun or hair dryer on low helps the vinyl settle into any tighter curves near the pillar.

Care, Removal, and Trail Use

After application, wait about 48 hours before pressure washing so the adhesive fully bonds. Hand washing with mild soap keeps the edges crisp, and avoiding direct high-pressure spray on the decal edges helps it stay put through mud season. When you want to remove it, warm the vinyl gently and peel it away slowly; it comes off in one piece on most surfaces without leaving residue. Static cling versions simply peel off with no adhesive at all. Whether you run forest service roads, beach sand, or just the commute, this set holds its look through regular driving. Questions about sizing for your specific doors or fenders? Message us before ordering.

What you get

• Safari snorkel silhouette printed as a two-piece body decal set
• Fits Jeep Wrangler fenders and doors; not affiliated with or endorsed by the manufacturer
• Available in matte, gloss, clear, and static cling finishes
• Width options from 12 to 48 inches to suit your build
• Printed on cast vinyl that conforms to body curves
• Removable without drilling or permanent vehicle modification
• Includes printed application instructions with every set

Specifications

Frequently asked questions

Will this decal set fit my Jeep Wrangler?

The set is designed to follow the fender and A-pillar line of the Jeep Wrangler. With widths from 12 to 48 inches, you can choose the size that best matches your fender height. Not affiliated with or endorsed by the manufacturer.

Can I remove it later without damaging my paint?

Yes. Warm the vinyl gently with a hair dryer and peel slowly. On most well-maintained paint it removes in one piece. The static cling option peels off with no adhesive at all.

Which finish should I choose?

Matte blends into flat paint for a subtle look, gloss adds shine, clear lets your paint color show through, and static cling is best if you want a temporary, repositionable option.