Camper Van Sunset Decal for RVs, 4-18 Inch Vinyl

Description

A matte vinyl camper van sunset decal for travel trailers, RVs and van conversions. Available in 4, 8, 12 or 18 inch sizes to fit windows, doors and rear panels.

A Sunset Scene Made for Life on the Road

This decal pairs a classic camper van Vinyl Cutting Machine with a warm sunset backdrop, capturing the feeling of pulling into camp just as the sky turns gold. The design works as a single statement piece on a rear window or as a smaller accent on a side panel, cooler box or laptop lid. Because the artwork is printed on matte vinyl, it reads like a screen-printed Graphic rather than a shiny sticker, which suits the painted surfaces of most trailers and motorhomes. Choose the 4 inch size for subtle detailing, or go up to 18 inches when you want the sunset scene to carry the whole panel.

Why Campers Choose Our Camper Decals

RV owners ask a lot of their graphics: sun exposure, road grime, and the occasional pressure wash. We print this camper decal on Cast Vinyl with fade-resistant inks so the sunset tones hold up through long seasons of travel. The matte finish cuts glare, which matters on large flat panels that catch afternoon sun. Application is a simple peel-and-stick process with a transfer film that keeps the design aligned as you place it. The decal removes cleanly with heat when you are ready for a change, leaving the underlying surface ready for the next design.

Choosing the Right Size for Your Rig

Measure the flat area where you plan to place the decal before ordering, and give yourself at least an inch of clearance on all sides. The 4 and 8 inch sizes suit window corners, storage doors and smaller campers, while the 12 and 18 inch options work well on trailer rear panels, tow vehicle windows and van side doors. On curved surfaces near wheel wells or body creases, pick a smaller size so the vinyl can follow the contour without lifting. If you are layering this design with other travel-themed graphics, the 8 inch size is a good middle ground that balances visibility with flexibility.

Application Tips for a Clean Install

Start with a clean, dry surface free of wax, dust and water spots, ideally working in temperatures between 60 and 80 degrees Fahrenheit. Position the decal with masking tape along one edge to act as a hinge, then peel the backing away gradually as you smooth the design down with a squeegee or credit card. Work from the center outward to push air toward the edges. Wait 24 to 48 hours before washing the rig so the adhesive fully bonds. On textured fiberglass, firm pressure during installation helps the vinyl conform to the surface.

What you get

• Camper van and sunset design printed on matte Cast Vinyl
• Available in 4, 8, 12 and 18 inch decal sizes
• Fade-resistant inks suited to outdoor travel use
• Peel-and-stick application with transfer film included
• Matte finish reduces glare on windows and panels
• Removable with heat for clean surface changes
• Made in the USA by LEO Sticker

Specifications

Frequently asked questions

Will this decal hold up on the outside of my travel trailer?

Yes. It is printed on matte Cast Vinyl with fade-resistant inks and an outdoor-rated adhesive, designed for trailer panels, windows and doors that see sun and weather.

How do I remove the decal later?

Warm the decal gently with a hair dryer or heat gun on a low setting, then peel it away slowly at an angle. Any remaining adhesive can be cleaned with a mild adhesive remover.

Which size should I order for a rear window?

Measure the flat glass area first. Most rear windows fit the 8 or 12 inch size comfortably, while the 18 inch option suits larger panels where you want the sunset scene to be the focal point.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.