Camo Hardtop Decal Kit for Jeep Wrangler | LEO Sticker

Description

A camo vinyl decal kit cut to dress up the hardtop on your Jeep Wrangler. Choose your width from 12 to 48 inches and pick a matte, gloss, or clear finish.

Camo Coverage for Your Jeep Wrangler Hardtop

This hardtop decal kit brings a camouflage pattern to the roof of your Jeep Wrangler without paint or permanent changes. Each kit is cut from cast vinyl and sized to work with the flat panels of a factory-style hardtop, so you get clean edges that follow the body lines instead of a wrap-around mess. It is made for owners who want a trail-ready look that can be peeled off before a lease return, resale, or a change in style. Whether you run your Jeep daily or keep it for weekend trips, this kit gives the top a finished, purposeful appearance in an afternoon of work with basic tools. Not affiliated with or endorsed by the manufacturer.

Pick Your Size and Finish

Every kit ships as a matched set of panels, and you choose the overall width from 12 inches up to 48 inches before checkout. Smaller widths work well if you want a camo accent stripe along the roof edges, while the larger sizes cover more of the hardtop surface for a fuller pattern. Finish options include matte for a flat, non-shine look that hides dust on the trail, gloss for a deeper, cleaner appearance after a wash, and clear for a subtle protective layer over existing paint. All options use the same cast vinyl base, so the pattern and cut stay consistent no matter which finish you select. If you are between sizes, measure the flat area of your top first.

How the Decals Go On

Application is a dry process you can do in a garage or driveway. Start by washing the hardtop and letting it dry completely, then lay each panel out in the sun or a warm room so the vinyl relaxes before placement. Peel the backing, position the panel, and smooth it from the center outward with a squeegee or soft card to push air toward the edges. The vinyl is repositionable during the first few minutes, so you can lift and reset a panel if it lands crooked. Work panel by panel rather than all at once, and avoid applying in cold weather or direct heat. Full instructions are included in the box with every kit.

Why Jeep Wrangler Decals From LEO Sticker

We print and cut every camo hardtop kit in our own shop, which means your order is produced after you place it rather than pulled from a shelf of old stock. That lets us offer the full 12 to 48 inch width range and your choice of finish without compromise on pattern alignment. We use cast vinyl because it conforms to the gentle curves of a hardtop better than thicker films, and it removes cleanly when you are ready for a change. Our team is available by message if you have questions about sizing or which finish suits your build. Not affiliated with or endorsed by the manufacturer.

What you get

• Camo pattern printed on cast vinyl cut for Jeep Wrangler hardtop panels
• Choose overall kit width from 12 to 48 inches
• Available in matte, gloss, and clear finishes
• Sold as a complete set of matched panels
• Dry application with repositioning time during install
• Printed and cut to order in our US shop
• Removable without paint damage when installed and removed properly

Specifications

Frequently asked questions

Will this kit fit my Jeep Wrangler hardtop?

The panels are cut to follow the shape of Jeep Wrangler hardtops, and the 12 to 48 inch width range covers different coverage levels. Measure the flat area of your top before ordering to confirm the size you want. Not affiliated with or endorsed by the manufacturer.

Can I remove the decals later?

Yes. Warm the vinyl with a hair dryer or heat gun on low and peel it away slowly. Cast vinyl is designed to come off cleanly when removed with heat and patience.

Which finish should I choose?

Matte gives a flat trail look and hides dust, gloss gives a cleaner shine after washing, and clear works as a subtle layer over paint. All three use the same camo print and cast vinyl base.