By vehicle
By style
By position
Guides
Marine & water
Powersports
Storefront & office
Labels & packaging
Bulk & wholesale
Send your own artwork
Upload your logo or sketch on any product page: we cut it in the width you choose.
Shop
Kids & anime
Sports & fan
Custom stickers
Start here
Your design, our vinyl
Send a sketch or logo, optional upload box sits under the size selector on every product.
Finishes we print
Sizes we cut
12"18"24"36"48"
A torn American flag decal set printed on cast vinyl, made for drivers who want a bold patriotic look on their pickup, semi or work truck. Choose the width that fits your rig.
JPG, PNG, WEBP or PDF, up to 20 MB. Leave this empty to order the design shown above.
This rip-style American flag decal set gives trucks, semis and trailers a torn, weathered flag look that reads bold from a distance. Each piece is cut from cast vinyl with a matte or gloss finish so you can match the look you want, whether that is a muted worn-cotton feel or a crisp printed flag. The rip edges are contour cut, so the torn effect follows the design instead of sitting inside a rectangle. It is a straightforward way to add patriotic truck graphics that hold up through highway miles, car washes and long hauls. Pick from 12-inch up to 48-inch widths to fit everything from a tailgate to the side of a sleeper cab.
The set is sold in matched pieces sized to work as one continuous design across your vehicle. Smaller widths in the 12 to 18 inch range suit car windows, toolboxes and tailgates. Mid sizes around 24 to 30 inches fit pickup doors and bed panels. The larger 36 and 48 inch widths are cut with semi trucks, flatbeds and trailers in mind, where you need the flag to stay readable at distance. Before ordering, measure the flat area you plan to cover and compare it against the listed width for the option you select. Applying to a clean, dry, wax-free surface at moderate outdoor temperature gives the vinyl the best bond.
Every rip flag graphic in this line is printed on cast vinyl, which conforms to gentle curves and panel contours better than thicker films. Choose a matte finish for a subdued, worn look that cuts glare, or a gloss finish if you want the colors to pop like a fresh flag. Clear and static cling options are also available for drivers who want the design on glass without a visible background. Cast vinyl is thin and flexible, so edges lay flat and the graphic follows body lines instead of fighting them. All finishes are printed with printed inks to help the reds and blues stay true through sun exposure.
Application is a dry process you can do in a driveway with a squeegee or credit card. Start with a clean surface free of wax, grease and dust, then peel the backing and position the graphic before smoothing from the center outward to push out air. The rip edges are pre-cut, so there is no trimming needed after installation. Work in shade or a garage when possible, since hot direct sun can make the vinyl tacky and harder to reposition. Avoid washing the vehicle for the first day or two so the adhesive fully sets. If you are placing the flag on a semi trailer, check that the placement stays clear of DOT numbers and required markings.
The 36 and 48 inch width options are sized for semi tractors, trailers and flatbeds. Measure the flat panel area you want to cover and choose the width that matches, keeping the graphic clear of DOT numbers and required markings.
Matte gives the most subdued, weathered appearance and cuts glare on sunny days. Gloss makes the red and blue read brighter and cleaner. Clear and static cling options work best on glass surfaces.
Yes. Warm the vinyl with a hair dryer or heat gun on a low setting and peel slowly at a shallow angle. Any leftover adhesive can be cleaned with a vinyl-safe adhesive remover. Removal is easiest in warm conditions.
12", 18", 24", 36", 48"
There are no reviews yet.
You must be logged in to post a review.
Your shopping cart is empty
Notifications
