American Flag Tear Truck Vinyl Decal Kit | 12"-48"

Description

A two-panel tear-through flag graphic that turns your truck's tailgate or door into a patriotic display. Printed on cast vinyl and sold as a set with widths from 12 to 48 inches.

A Tear-Away American Flag Decal Built for Truck Panels

This kit gives your truck the look of the flag ripping straight through the metal. The two panels are printed so the torn edges line up across your tailgate, toolbox, or rear window line, creating a continuous tear effect that reads clearly from a distance. Each set is cut to your chosen width, from 12 inches up to 48 inches, so you can size it to a compact tailgate or stretch it across a full-size dually bed. The design uses a faded, weathered red, white, and blue palette that layers well over factory paint colors. It is a straightforward way to add an american flag decal statement to a work truck, farm truck, or weekend hauler without touching the paint underneath.

How the Two-Panel Tear Effect Works

The graphic is split into a left and right panel with a torn strip between them. You position the panels so the rip sits where you want it, such as centered on the tailgate latch or offset over a door handle line. Because the tear is part of the printed artwork rather than a straight cut, small overlaps and gaps at installation do not break the illusion. A hinge-and-peel approach with masking tape works well: tape each panel in place, check the alignment from ten feet back, then apply one panel at a time. The kit ships with application tape over the printed surface so the vinyl goes down as one piece per panel instead of dozens of individual stripes.

Matte, Gloss, Static Cling and Clear Finish Choices

Choose the surface that fits your truck best. Matte gives the flag a flat, painted-on look that hides glare in bright sun and photographs cleanly. Gloss adds depth and shine that stands out against flat factory paint. Static cling is a non-adhesive option for the inside of windows, removable and repositionable without residue, which suits leased vehicles or seasonal displays. Clear finish puts the artwork on transparent film for glass applications. All four options are printed with printed inks on our cast vinyl, which conforms around body lines, panel gaps, and slight texture without lifting at the edges. The calendered alternative is available on request for budget builds.

Sizing, Care and Long-Term Use

Measure the flat area you plan to cover before ordering, and pick the width that fits inside your panel edges with a small margin. The 12-inch width works on toolboxes, cooler lids, and motorcycle fairings; 24 to 36 inches covers most single cab doors and midsize tailgates; 48 inches spans full-size tailgates and gooseneck bed covers. Wash around the graphic with mild soap and a soft cloth, and skip high-pressure nozzles directly on the torn edges. Avoid scraping ice off the printed area in winter. When you are ready for a change, warm the vinyl with a hair dryer and peel it away slowly, then clean off any adhesive residue with isopropyl alcohol.

What you get

• Two-panel tear-through flag design that aligns across tailgates, doors, and bed panels
• Available in 12", 24", 36", and 48" widths to fit compact through full-size trucks
• Printed on cast vinyl with printed inks for outdoor exposure
• Choose matte, gloss, static cling, or clear finish at checkout
• Ships with application tape so each panel installs as a single piece
• Weathered red, white, and blue artwork that layers well over factory paint
• Removable with heat and isopropyl alcohol cleanup

Specifications

Frequently asked questions

Will this fit my specific truck model?

The kit is sold by width rather than by vehicle model. Measure the flat area you want to cover and choose the closest width from 12 to 48 inches. Because the tear design is forgiving at the edges, exact panel dimensions are not required.

Can I put the static cling version outside?

Static cling is designed for the inside of glass, where it holds without adhesive and can be repositioned or removed anytime. For exterior body panels, choose matte, gloss, or clear adhesive vinyl.

What if the two panels do not line up perfectly?

The torn edge is part of the printed artwork, so slight overlaps or small gaps at the tear line do not break the effect. Dry-fit both panels with masking tape and step back to check alignment before peeling the backing.