Woodland Camo Rip Truck Graphics, Set of 2 Decals

Description

A pair of woodland camo rip-style vinyl truck graphics sized from 12 to 48 inches wide, cut for easy application on cars, trucks and semi tractors. Made for drivers who want a bold camo look without a full wrap.

Big Rip Camo Decals Built for Trucks and Semis

This set of two woodland camo rip decals brings a torn-metal look to your rig without the cost or commitment of a wrap. Each decal is printed on cast vinyl in a classic woodland camo pattern of greens, browns and tan, so it reads as authentic hunting camo rather than a stylized print. The rip edge design creates the illusion of torn paint revealing camo underneath, which works especially well on door panels, fenders and trailer sides. Whether you drive a pickup, a work truck or a semi tractor, the pair layout gives you matching graphics for both sides of the vehicle. Choose the width that fits your space, from a subtle 12 inch accent to a full 48 inch statement piece across a cab or box.

How Our Camo Decals Are Printed and Cut

Every pair is printed in our shop on cast vinyl using fade-resistant inks, then contour cut to follow the rip edge so there is no clear border or background to trim. The matte finish option keeps the camo pattern looking natural and non-high-visibility, closer to how real camouflage fabric reads in daylight. Gloss and clear finishes are also available if you want the pattern to pop or prefer a layered look over your paint color. Because the artwork is printed before cutting, the camo tones stay crisp along the torn edges instead of showing white cut lines. Each decal arrives weeded and masked, ready to position and apply with a squeegee in one session.

Applying Your Truck Graphics Step by Step

Start with a clean, dry surface and a temperature above about 60 degrees Fahrenheit for best adhesion. Position each decal with masking tape hinges before removing the backing, then squeegee from the center outward to push air toward the edges. The cast vinyl conforms to mild curves like fender crowns and door contours, so take your time on compound areas and apply gentle heat from a hair dryer if needed. Once the transfer tape is peeled back at a low angle, press the graphic down firmly and let it set before washing the vehicle. Two-person application is helpful on the larger 36 and 48 inch sizes, where keeping the decal level across a truck door or semi cab takes an extra set of hands.

Why Drivers Choose a Set of Two Camo Rips

Buying the pair means both sides of your truck get the same rip in the same spot, which gives the vehicle a finished, deliberate look instead of a single random sticker. Fleets and owner-operators use these to add personality to a semi without affecting DOT numbers or required markings, since placement is flexible around existing lettering. Hunters and outdoors drivers like the woodland pattern for tying a daily driver to their gear. The rip design also hides dust and road grime well along the torn edge, so the graphics keep looking intentional between washes. If you want to test the look first, the smaller widths let you try placement on a toolbox or trailer before committing to a full-size set on the cab.

What you get

• Set of 2 matching woodland camo rip decals for both sides of your vehicle
• Available in 12, 24, 36 and 48 inch widths to fit cars, trucks and semi tractors
• Printed on cast vinyl with fade-resistant inks
• Choose matte, gloss, clear or static cling finish
• Contour cut along the rip edge with no background to trim
• Conforms to gentle curves with light heat during application
• Flexible placement around existing lettering and markings

Specifications

Frequently asked questions

What width should I choose for a semi tractor?

Most semi cab doors and sleeper panels can carry a 36 or 48 inch decal comfortably. Measure the flat area you want to cover before ordering, and remember the pair includes one decal per side of the truck.

Will these camo decals damage my paint?

Applied to factory paint in good condition, the vinyl removes cleanly with gentle heat. We cannot promise results on repainted, porous or damaged surfaces, so test a small area if your paint is not original.

Can I put these over existing lettering or decals?

The rip graphics apply best on smooth, flat paint. Avoid overlapping existing stickers or textured surfaces, since air pockets under the vinyl can cause lifting over time.

Is the matte finish the best choice for camo?

Matte is the most popular choice because it keeps the woodland pattern non-high-visibility and natural. Gloss adds shine, and clear lets your paint color show through lighter areas of the design.