Truck Racing Stripe Decal Kit | Matte & Gloss Vinyl

Description

A racing stripe decal kit for truck owners who want a motorsport look without paint. Cut from Cast Vinyl in matte or gloss finishes, sized to fit doors, tailgates and bed panels.

Racing Stripes That Read as Motorsport, Not Stickers

This racing stripe decal kit brings a track-inspired layout to your truck in a single coordinated set. Each stripe is cut from Cast Vinyl with clean edges and a low profile, so the graphics sit flush against the paint instead of floating on top of it. The kit is designed around the proportions of a modern mid-size pickup cab, bed and tailgate, with stripes that follow body lines rather than fighting them. Whether you want a subtle twin-stripe accent or a full competition-style layout, the set gives you the pieces to build it. Choose matte for a low-key, almost painted look, or gloss for a finish that matches clear coat and pops in direct sunlight.

Choose Your Size and Your Finish

Every kit is offered in four decal sizes: 4, 8, 12 or 18 inches, measured by stripe width. The 4-inch size works well as a hood or tailgate accent on smaller panels. The 8-inch size is a popular middle ground for side stripes along the doors and bed. The 12-inch size covers more surface for a bolder statement, and the 18-inch size fills wide hoods and bedsides with a full racing treatment. Finishes include matte, gloss, clear and static cling. Static cling lets you preview placement or run a temporary look with no adhesive at all, while clear vinyl blends the stripe edges into the paint for a near-factory appearance.

How to Apply Your Stripe Kit

Application is a dry or wet process using the transfer film that ships with each kit. Start with a clean, wax-free surface and a temperature between roughly 60 and 80 degrees Fahrenheit. Position each stripe with light masking tape, step back and check alignment from a distance, then peel the backing and squeegee from the center outward. The Cast Vinyl conforms to gentle body curves and panel seams without excessive heat. Small mistakes can be lifted and reset during installation. Full instructions are included with every order, and the kit is cut so each piece can be installed one panel at a time, which keeps the layout manageable even for first-time installers.

A Decal Kit You Can Change Later

Because these stripes are printed on cast or calendered vinyl, they can be removed down the road without the commitment of a paint job. Warm the vinyl gently with a hair dryer or heat gun on a low setting and peel at a shallow angle, then clean off any residue with an adhesive remover safe for automotive paint. If you like to refresh your truck's look seasonally, static cling pieces can be taken off and reapplied repeatedly. This kit also pairs well with other pieces from our truck graphics collection, so you can extend the racing theme with numbers, accents or panel decals in the same finish for a matched, cohesive build.

What you get

• Racing stripe decal kit cut from Cast Vinyl for a painted-on look
• Available in 4, 8, 12 or 18 inch stripe widths
• Matte, gloss, clear and static cling finish options
• Includes transfer film and step-by-step installation instructions
• Conforms to gentle body curves and panel seams
• Removable without repainting when warmed and peeled carefully
• Pieces install one panel at a time for easier alignment

Specifications

Frequently asked questions

What size should I choose for my truck?

The 8-inch size is the most common choice for side stripes, while 12 or 18 inches suit larger areas like hoods and bedsides. The 4-inch size works best for tailgates or subtle accents. Measure your panels before ordering to confirm the look you want.

Can I install this kit myself?

Yes. Each piece is cut to install one panel at a time, and the kit includes transfer film and instructions. Take your time aligning with masking tape before committing, and work in moderate temperatures away from wind and direct sun.

Will the stripes damage my paint when removed?

When removed correctly by warming the vinyl and peeling at a low angle, the adhesive releases cleanly from well-maintained factory paint. Avoid pulling cold vinyl aggressively, and test in a small area first if your paint is older or repainted.

Is this an official brand product?

Not affiliated with or endorsed by the manufacturer. It is an independent aftermarket Vinyl Decal.